Dear Mighty Zen Mod,
Have fun, but be careful with the Tannoys. Back injuries are no fun. 🙁
Take care and stay safe.
Dennis
Have fun, but be careful with the Tannoys. Back injuries are no fun. 🙁
Take care and stay safe.
Dennis
Clearly this is a conspiracy by "Brand Name HiFi" to keep affordable Top-Tier-Audio out of the hands of builders! I bet Yamaha or Dennon started the dang pandemic🙄
Rest up Zen,
We'll wait...
I't'll give me time to make more hot sauce!
Jeffrey
Rest up Zen,
We'll wait...
I't'll give me time to make more hot sauce!
Jeffrey
I have no intention of starting this build until the snow starts to fall. No rush for me, stay healthy. With things opening up, the wait times for everything is unusually long. Wait a couple of weeks and everyone in a hurry will be done.
Okay Choky,
The Serbia to Arizona trip is complete 😀 Thank you, it looks like I have some soldering to do.
Did you run any sims for my 4 ohm loudspeaker? Or is this kit you sent me for the load you used?
Cheers,
Greg
The Serbia to Arizona trip is complete 😀 Thank you, it looks like I have some soldering to do.
Did you run any sims for my 4 ohm loudspeaker? Or is this kit you sent me for the load you used?
Cheers,
Greg
Hey Greg,
From earlier in the year, ZM's suggestion:
The Singing Bush
Easy to do. All you need is a USB sound card, software and a few things such as cable, 4R load on heat sink, voltage divider so you don't fry your sound card. Turning the pot adjusts the Vds.
In my THF version I played with Vds and Iq, but I also raised the H2 by taking the speaker out at the half way point of the 0.6R between the current source and THF. It raised the overall THD a bit but I am happy with it.
Out of curiosity, I ran some sims with 2SK180 and 4R load, but the results did not correlate with ZM's real life measurements. So your best bet is to build it and then test and adjust.
Ben
From earlier in the year, ZM's suggestion:
The Singing Bush
Easy to do. All you need is a USB sound card, software and a few things such as cable, 4R load on heat sink, voltage divider so you don't fry your sound card. Turning the pot adjusts the Vds.
In my THF version I played with Vds and Iq, but I also raised the H2 by taking the speaker out at the half way point of the 0.6R between the current source and THF. It raised the overall THD a bit but I am happy with it.
Out of curiosity, I ran some sims with 2SK180 and 4R load, but the results did not correlate with ZM's real life measurements. So your best bet is to build it and then test and adjust.
Ben
Man with Hair like that does not measurements
Measurements are done for a Man with Hair like that.
🙂
GG, just make it as per schematic and enjoy ; when bored , you can play with THD
give it big honkin speaks and THD will be at bay, while having zillion big headroom
Measurements are done for a Man with Hair like that.
🙂
GG, just make it as per schematic and enjoy ; when bored , you can play with THD
give it big honkin speaks and THD will be at bay, while having zillion big headroom
Celebrate my little daughter officially becoming a primary school student (because of the constant twists and turns during this period, now finally school)
And my shop (Taiwan site) opened
From September to October, all friends who place an order can get free shipping. I will pay for the shipping.
2SK1058 2SJ162 2SK1530 2SJ201 THF-51 2SK182ES 2SK180 LM350K 2N5566 MJ21193 MJ21194 MJ21196 MJ21195 MJ11015 MJ11016 NOS Jinfeng Triode
And my shop (Taiwan site) opened
From September to October, all friends who place an order can get free shipping. I will pay for the shipping.
2SK1058 2SJ162 2SK1530 2SJ201 THF-51 2SK182ES 2SK180 LM350K 2N5566 MJ21193 MJ21194 MJ21196 MJ21195 MJ11015 MJ11016 NOS Jinfeng Triode
I resumed work today, and continue to sell 2SK182ES 2SK180 2SK1058 2SJ162 2SK1530 2SJ201 LM350K MJ21194G MJ21193G MJ21195 MJ21196 MJ15025 MJ15024 MJ15015 MJ15016 THF-51N THF-51 If you need a transistor, integrated chip, you can contact and send @qq.com directly: 378632242@qq.com
Hi, I can find TOKIN THF-51S and I am willing to use that model, but I am not clear what extra I need to build the amp, sorry I only have built an amp 25 years ago, I am a bit of a noob. I think I need two IXFN140N20P, 'big output electrolytic' which I am not sure I know voltage and farads. The the power supply, I see +60, I think is the standard power supply used by Nelson Pass derived designs? Where can I find the power supply or schematics (I could build my own). I also saw that there is a version using chokes, which I find very interesting, I saw some pictures in the main thread. Is there a schema on how to wire a choked version? I see the tip and tricks thread has a schema but I have not found one (yet) on the choked version.
Last edited: