I am working on a new speaker it has two woofers and two tweeters.are you Dodo , too ?
The woofers are 30mm and the tweeters are 24mm but I want bigger.
Hoping to fit 32mm woofers and may be 25mm tweeters.
he meant boxed Dodo - sort of rarity these dayzzzzz .......
( not that one needs instructions for maintaining Dodo
)
btw. - nice speaker
( not that one needs instructions for maintaining Dodo
)btw. - nice speaker
Last edited:
Designing proper crossover network iz gonna be a little tricky but when properly tweaked should sing nicely when attached to tuned exhaust port... 😀😀😀
BTW - the dachshunds message for the day iz image below. Appropriate for users of Papa's class A amplifiers..... Now that the hot months of summer will soon be past us I figure that people will be firing up the amps to keep the house warm.... 😎
Attachments
Last edited:
I had a vintage version when I was but 18 years old!
Here is a picture of it in location...you will see that it was an early stereo version.
Important to keep the ports polished for waf reasons.😉
You will see that the serial number really does sum-up this post pretty well!!😀
Here is a picture of it in location...you will see that it was an early stereo version.
Important to keep the ports polished for waf reasons.😉
You will see that the serial number really does sum-up this post pretty well!!😀
Attachments
I didn't know that the electric headlamp had been invented when you were still 18 Brian...... 😉
The pic is of an up-dated version. It is not 100% original. The lights were added at the same time as the second channel so that placing the needle in the groove could be easily facilitated at night. The really observant/savant viewer will notice the suspension system...independent vertical spring loaded. This is to decrease feedback. The rebound springs are to save the record should you drop the stylus too heavily on the record.
I spy an electric starter on that version as well - so it iz indeed a very updated model..... Did you have to wear a "car coat" and goggles when taking her out for a spin? 😀😀😀
Off-on topic 🙂
Time flies 🙂 Few days ago mu son celebrated his 1st birthday, and he is already in love with good sound, Pass amp and Open baffles. Here is one of his favorite tunes. Still don't know if the music catches his attention, or the lips... 😀 😎
Miss Kittin & The Hacker - 1000 Dreams - YouTube
Time flies 🙂 Few days ago mu son celebrated his 1st birthday, and he is already in love with good sound, Pass amp and Open baffles. Here is one of his favorite tunes. Still don't know if the music catches his attention, or the lips... 😀 😎
Miss Kittin & The Hacker - 1000 Dreams - YouTube
Attachments
properly musav (sorry Yanks - that's so hard to translate - meaning all child saliva etc. residue around lips ; parents know that's probably most sweetest thing in the world) ........
give him big hug and sočan (for yanks - juiccccccy) kiss
........
give him big hug and sočan (for yanks - juiccccccy) kiss
........
I am working on a new speaker it has two woofers and two tweeters.
The woofers are 30mm and the tweeters are 24mm but I want bigger.
Hoping to fit 32mm woofers and may be 25mm tweeters.
How dodoeish of you. How’s one meant to know how big those things are do us favour and get reference BIC lighter please..
Bit of carbide paste and elbow grease after ?
Is going to be pain to fit the 25 tweeters. I mean the room is there but head gasket won't like it
Last edited:
I have a very dumb cunning plan or is it a cunning dumb plan.
I have increased the piston size by +8mm. The gaskets clear the audio combustion chamber by +4mm all the way around.
I am working on a new speaker it has two woofers and two tweeters.
The woofers are 30mm and the tweeters are 24mm but I want bigger.
Hoping to fit 32mm woofers and may be 25mm tweeters.
The preamp lower left on pic. What brand and size is it?