Unfortunately, after a quarter mile, he will still be ~100m in front of you.
Super-Twin record is about 6.4s/1/4 (Rolfstad) at a top speed of some 360km/h (Bengtssen).
So it'll take the N2O bike ~10.7s to pass the Tifosi, about 750m
Yes. Im sure your right. I took the numbers from a 4-wheel friend. His car passes a 302 km/h running car at exactly 402 m, according to his numbers.
Still pretty fast. Have you run a quartermile?
/S
Last edited:
????? 😀😀😀
Well - at least that iz better than I would be doing. They wouldn't let me anywhere near that thing if they were half smart...
Attachments
Last edited:
Last time I can remember, I fainted after 100 yards, too many smokes.
Do like the dragstrip though.
(fastest I've ever done was a hair close of 300km/h, sitting next to Lamborghini's test driver. On water, +100kn, close to 200km/h)
I did some top fuelers and some hundreds gaz runs. Had the record on some lanes to. I did some crashes, didnt stop me until I had kids.
After that, I can hardly press the handle in a roundabout anymore. It's just not exciting anymore.
My first fuzz was actually sitting on the front wheel, 12-14 yrs old, preventing the bike to turn around at test starts in the garage 3 floors underground central stockholm. I can still feel the feathers in my stummack. I lifted 10-20 inches every time Kacku grabbed the gaz handle
Last edited:
Thomas,
my winter chill is from not being able to move around a lot, due to a dead beat foot.
Winter season is usually pretty moderate, only issue I have with it is what I call a Frozen Fowler with Blue Marbles.
Deuce Bigalow - Detective Fowler - Thin Dick - YouTube
just realized that Zen Mod read bckwrdz is nothing short of Domnez
go figure , Domnez itself !
for life crowned King of Dummiez in da Pub
go figure , Domnez itself !
for life crowned King of Dummiez in da Pub
@ZM:
😎😀😀😀🙄
[and dnuohcsad is what? You know who to ask!😉]
Had a very busy week taking pics for a friend who has a new book almost ready for the press. Its about our river, the Tweed. Taken over 800 frames and first roughed them for selection.
Hard work, but the pudding will be good.
😎😀😀😀🙄
[and dnuohcsad is what? You know who to ask!😉]
Had a very busy week taking pics for a friend who has a new book almost ready for the press. Its about our river, the Tweed. Taken over 800 frames and first roughed them for selection.
Hard work, but the pudding will be good.
Last edited:
don't forget that porridge is going before pudding 😉
will ya give uz small portion of taste ?
pretty plz , with cherry on top ?
will ya give uz small portion of taste ?
pretty plz , with cherry on top ?
The dachshunds say - yes pleaze - we wanna see those wonderful photo's!!! (just a little - maybe the 2nd cut one's that won't get to the printing press)..... 😀😀😀
(understanding about non-disclosure stuff tho - so not too greedy) 🙄
Pros are not allowed in the contest, amateurs only.
We were going to wait till closing day, then disqualify you.
Dom - Dutch - English Translation and Examples
(see Thomas, I told you he'd find out)
It's a Mikado amp, no screws.
His Modnez draws a panel out, hoping the rest doesn't fall over.
His Modnez draws a panel out, hoping the rest doesn't fall over.
no screws , no xformers (biphase ditto from mains) no caps no pcbs , no connectors
learned that from last Pa's sissie amps
Babelfish XS (3,5W A class ,all the way ; I have weak mains here )
learned that from last Pa's sissie amps
Babelfish XS (3,5W A class ,all the way ; I have weak mains here )
My bad, I thought you was in flogging mood again, found a poor soul to brand with your trademark.
(weak vains are not uncommon in the Slave's tail of the Carpathians, afaih)
(weak vains are not uncommon in the Slave's tail of the Carpathians, afaih)