I hear Pa laughing...MUAHAHA....while we were hangin' here tellin' dummy tales, he was preparing a new puzzle for us, especially for ZM... 
😎 😀
Where is "I like" button? 🙂
😎 😀Where is "I like" button? 🙂
Attachments
This is possible, I do work in a hospital, and the pic was taken in the staff car park, it probably belongs to an anesthetist who has been sniffing too much gas 😀.
Hope I'm never on his operating table
OK then. Folded cascode with local feedback.
What happened to the circlotron output stage Nelson? Did it not sound as good as a tweaked N/P channel source-follower stage with paralleled current sources?
I know these SIT's are new and exciting but when are you also going to start playing with laterals?
Last edited:
Well c2cthomas! I am becoming somewhat worried about your increasing interest in drag!😕
First, the picture - supposedly - sent for Melonhead as a visual-aid to "sweet dreams". Now, all this about Nitrous Oxide!!!🙄
What is really going on? Have you something to tell us???
😀😀😀
First, the picture - supposedly - sent for Melonhead as a visual-aid to "sweet dreams". Now, all this about Nitrous Oxide!!!🙄
What is really going on? Have you something to tell us???
😀😀😀
What in the world does Nitrous Oxide have to do with drag???? I don't play around with either one of 'em.....🙄
Drag racing...............😉
#
Nitrous Oxide
www.chm.bris.ac.uk/motm/n2o/erratum.htmCached - Similar
You +1'd this publicly. Undo
A dragster It is for this reason, that the use of nitrous oxide is primarily confined to drag racing, street racing, and other short duration racing applications.
#
#
Nitrous Oxide
www.chm.bris.ac.uk/motm/n2o/erratum.htmCached - Similar
You +1'd this publicly. Undo
A dragster It is for this reason, that the use of nitrous oxide is primarily confined to drag racing, street racing, and other short duration racing applications.
#
Last edited:
No.
F6 gets perfect matching of like polarities without isolated supplies.
I have 2,000 laterals sitting on the floor next to my bench.
😎
Attachments
Reverse-engineering the cascode and gain-boosting technique | TechMonks
Interesting article..... Maybe somebody else can figure it out
Interesting article..... Maybe somebody else can figure it out
Damnation. Hahahaha
Nice. Can't wait to see that one.
Alright. Now you are talking. I love them.
A balanced BA3 front end connected to a circlotron (source follower) using laterals is what I have been thinking of.
OK Zen Mod
I already have the Seas FR.
I went 12 rounds with myself and lost so I decided to take a chance on something that could be very special. It is an 8" coaxial with a 1 inch compression driver.
Thinking then to mate it with dual 12" drivers (don't really like 15" drivers) per channel, in open baffle.
However I am really dumb so I am thinking of trying 1.5.5 way if you catch my drift. Not duel .5 but two first order low pass filters at different frequencies (eg 300Hz for one woofer and 150Hz for the other woofer). With open baffle it is very easy to play
I have no idea what I am doing but it is amazing what you can achieve with very little knowledge just buy using your ears and gut instinct ideas.
I already have the Seas FR.
I went 12 rounds with myself and lost so I decided to take a chance on something that could be very special. It is an 8" coaxial with a 1 inch compression driver.
Thinking then to mate it with dual 12" drivers (don't really like 15" drivers) per channel, in open baffle.
However I am really dumb so I am thinking of trying 1.5.5 way if you catch my drift. Not duel .5 but two first order low pass filters at different frequencies (eg 300Hz for one woofer and 150Hz for the other woofer). With open baffle it is very easy to play
I have no idea what I am doing but it is amazing what you can achieve with very little knowledge just buy using your ears and gut instinct ideas.
Last edited:
Change of plan.
They no longer sell the coaxial.
Decided to give full range another chance. Something new and different.
My new speaker creation has begun.
It will be called the DUMBINATOR
They no longer sell the coaxial.
Decided to give full range another chance. Something new and different.
My new speaker creation has begun.
It will be called the DUMBINATOR