The Boominator - another stab at the ultimate party machine

Jump to Latest
#3,761
Naakka said:
Saturnus, you have recommened these speakers:
Woofer: Monacor SP-60 SP-60/4 - Monacor HiFi bass-midrange speakers 60Wmax 4Ω - Europe Audio
Tweeter: ND16FA-6 ND16FA-6 - Dayton 5/8 inch Neodymium Dome Tweeter - Europe Audio
Highpass to tweeter 6.8 uf capasitor

Do i need L-pad in tweeters in this set? Or do those woofers and tweeters match together without L-pad.
Click to expand...

That's what I've suggested to other before, yes.

No L-pad needed.

Build it into a PLUGGIS Ikea box... job done.
 
#3,762
After having read all the pages, and posts of this thread, I cant seem to remember anyone asking if they could use the HP10IT. I googled HP10w, but the link i pressed took me to the HP10IT, it's the same price, and the picture looks exactly the same... Can I use the HP10IT for this project, it seems like the exact same speaker...
 
#3,766
Another boombox builder here needing help:
I'm using two Monacor Sp-60 (8ohm) woofers and Monacor DT-25N for tweeters. I don't know anything about crossovers and such, so can I just use a single capacitor for filter like it is recommended with the Dayton tweeters? And if so, what value should they be?
 
#3,767
JiiP said:
Another boombox builder here needing help:
I'm using two Monacor Sp-60 (8ohm) woofers and Monacor DT-25N for tweeters. I don't know anything about crossovers and such, so can I just use a single capacitor for filter like it is recommended with the Dayton tweeters? And if so, what value should they be?
Click to expand...

It doesn't sound like a boominator or one of its siblings, so you're asking in the wrong thread......
 
#3,770
Power resistor

Hmmm...... I've just taken delivery of the 4ohm power resistors for my boominator filter (I'm using HP10w's and PT-407N's).... It's bigger, heavier and not what I expected, is this the right type?

BJ
 

Attachments

  • image.jpg
    image.jpg
    589.2 KB · Views: 403
#3,776
Ah. Now I get it. You mean the resistor needed to dampen a PHT-407N. Yeah. That's the right one they sent you.

I thought we were talking the 47ohm resistor on a piezo tweeter. That has to be carbon composition, or alternatively metal film.

Wirewound is fine for the series resistor before the series cap on a PHT-407N
 
#3,777
Saturnus said:
Ah. Now I get it. You mean the resistor needed to dampen a PHT-407N. Yeah. That's the right one they sent you.

I thought we were talking the 47ohm resistor on a piezo tweeter. That has to be carbon composition, or alternatively metal film.

Wirewound is fine for the series resistor before the series cap on a PHT-407N
Click to expand...

Phew, thanks Saturnus....... They are bigger and heavier than expected but as long as they are right, I can proceed... You suggested that I try 1 (or 2 paralleled) in series to my audio taste, so I bought 4..... I'm assuming that this sets the level of the tweeter and the cap sets the crossover point. I'm going to wire these in a way so I can easily remove them if I decide to upgrade to 24v amp9 and minidsp.........

or maybe I'll just build a signature an be done with it

BJ
 
#3,778
I finally started building a Boominator and originally I bought and planned to use a 2011 Lepai ta2020 but because people are having bad experiences with this amp I wanna get a better amp.

I found the new Indeed TA2021 and ordered it, but then realized than the input sensitivity is 600mV, which as far as I understand isn't good. It should be around 200mV.

So now my eyes are on either the SMSL SA-S1 TA2020 SMSL Silver SA S1 TA2020 20W 2 Pro Audio Class T Tripath Digital Amplifier Hi Fi | eBay or the SMSL SA-S3 TA2021 SMSL Hi Class SA S3 TA2021B Hi Fi Digital Amplifier Silver | eBay

I can't figure out which would be the best investment in terms of performance and power usage.

I'm using 3 12v 9AH and HP-10W and monacor 001 piezo's.

Any input is higly apreciated and thanks to Saturnus and others for all the information in this thread!
 
#3,780
Noobinicer said:
After having read all the pages, and posts of this thread, I cant seem to remember anyone asking if they could use the HP10IT. I googled HP10w, but the link i pressed took me to the HP10IT, it's the same price, and the picture looks exactly the same... Can I use the HP10IT for this project, it seems like the exact same speaker...
Click to expand...

Saturnus said:
No
Click to expand...

I have the same problem to find HP10W and the intertechnik's seller say me :
"I still explained a lot of times that the HP10W and HP10IT are 100% identical ."

Saturnus can you explain why i can't use HP10IT for boominator ?

Txs
 
You must log in or register to reply here.
Top Bottom