Just wondering whether the output of a Tent clock should be set at 5V or 3.3V when used with the DCX2496. On the DCX schematics the existing clock is powered from 5V. Regarding what the clock feeds, the 8420 converter is powered from 5v, but everything else runs off 3.3v. There is a 22R resistor on the output of the clock....
Can someone shed some light on this.
Thanks.
Can someone shed some light on this.
Thanks.
Yes, I can. Set it to 5V. The CS8420 runs off 5V. The 3004 runs off 3.3, but can handle 5v on it's I/O.
- Status
- Not open for further replies.