Technical Creation Studios Loudness Module
I build these loudness modules and are in a 40 pin dip package. These amplify the high and low frequencies of the audio spectrum and are summed back into the audio signal. I will post some real world photos as my card reader is broken and I cant upload good pictures. These I have built and tested and are working great. I have a about five PCB's handy on these. So I could five of them in the mail fairly quick. This for a single audio channel. I am asking $22.00 per module. PM me if interested.
I build these loudness modules and are in a 40 pin dip package. These amplify the high and low frequencies of the audio spectrum and are summed back into the audio signal. I will post some real world photos as my card reader is broken and I cant upload good pictures. These I have built and tested and are working great. I have a about five PCB's handy on these. So I could five of them in the mail fairly quick. This for a single audio channel. I am asking $22.00 per module. PM me if interested.
Attachments
Last edited:
Additional Modules
I also have PCB's for a digital controlled volume, bass, and tone control, digital controlled bass boost, and digital controlled Pre-Amp. They can all be controlled be logic pules from a micro controller or something like a Arduino. I also have a low noise OP-Amp FET option for the modules The are all 40 pin dips and 50 pin dips. These are design to be drop in modules that can controlled by you favorite Arduino platform. These are not 100% completed but I have the PCB's in hand and I am currently building the first batches of each.Let me know if you are interested. I would like to get a handle on how many would be interested.
I also have PCB's for a digital controlled volume, bass, and tone control, digital controlled bass boost, and digital controlled Pre-Amp. They can all be controlled be logic pules from a micro controller or something like a Arduino. I also have a low noise OP-Amp FET option for the modules The are all 40 pin dips and 50 pin dips. These are design to be drop in modules that can controlled by you favorite Arduino platform. These are not 100% completed but I have the PCB's in hand and I am currently building the first batches of each.Let me know if you are interested. I would like to get a handle on how many would be interested.
Attachments
Last edited:
High Current Power Supplies
I also the two power supplies that I build on as needed basis. The are linearly regulated and capable of a adjustable voltage output that range from 12 to 24 volt. One variation has a 20 amp output and the other has a 40 amp. Both a have a four 10,000 uf capacitor bank and each have a unregulated power tap I am asking $135.00 for the 20 amp variation and $250.00 for the 40 amp. Let me know if any body is interested. There is about a three week turn on these.
I also the two power supplies that I build on as needed basis. The are linearly regulated and capable of a adjustable voltage output that range from 12 to 24 volt. One variation has a 20 amp output and the other has a 40 amp. Both a have a four 10,000 uf capacitor bank and each have a unregulated power tap I am asking $135.00 for the 20 amp variation and $250.00 for the 40 amp. Let me know if any body is interested. There is about a three week turn on these.
Attachments
Attached is a link to my website and a link to my brochure. Have a look and let me know if I could help with anything.
Technical Creation Studios
http://www.technicalcreationstudios.com/TechnicalCreationStudiosBrochure.pdf
Technical Creation Studios
http://www.technicalcreationstudios.com/TechnicalCreationStudiosBrochure.pdf
- Status
- Not open for further replies.