Teac VRDS T1 won't play CD

[movie_fan]

Hi,

my Teac T1 transport doesn't play cds anymore.

When I load a cd, the tray makes a weird noise, and when I press play it does absolutely nothing.

So, any ideas where I should look at??

Thanks!

 

[mastertech]

i cant be more specific than this-first check whether the mechanism is jammed or there is a fault with it, then check if the signals of syscon are as they should be

 

[guytou]

Hi movie fan , it could be a misalignment of tray mechanism .The first is to get service manual , the alignment procedure is well explicit . check the belts tamben .

"cuidado com essa mecanica , tem um monte de afinaçoes ."

 

[movie_fan]

Ok, so anybody can send me the relevant parts of the service manual?

 

[scraggles]

A similar thing happened to mine after transporting whilst moving house.
Try taking the lid off and see if the disk spins when pressing play, mine didn't. All it needed was a gentle tap on the side of the motor and it's been ok ever since.

 

[movie_fan]

Well, it seems like some connectors were not correctly connected on the PCB, probably as the cables are tied together, they stressed them a bit.

So, the tie was loosened up a bit.

Probem solved!!