Taramps DSP 3000

[RJohns777]

Working on a Taramps DSP 3000. Anyone know the value of the zeners in the output. DZ10 shorted. No markings on the diode other than the blue band. No output shorted. One output of the driver chip Si8244BB going to DZ10 checks bad compared to the other driver. Low ohms.

 

[Jonjis]

15v zener

 

[RJohns777]

Thanks

 

[RJohns777]

No Jonjis. DZ1 checks fine. DZ10 (not on the board. I pulled it) is shorted.

 

[bl4ckw1d0w]

Should still be 15v zenner.

 

[RJohns777]

Thanks