I have Tad TL-1601 drivers along with TAD 4001 Compression drivers. I am interested in any and all information regarding the size, tuning etc of the 2402 Cabinet as well as the associated crossover network.
I currently have them playing in a 7 cubic foot box with the 4001 on a 350hz Edgarhorn crossed over at 800hz (2nd order). It's very nice and while it sounds great it begs to be dialed in.
Any information, drawings, schematics or associated materials would be truly appreciated.
Thanks in advance,
Brad
I currently have them playing in a 7 cubic foot box with the 4001 on a 350hz Edgarhorn crossed over at 800hz (2nd order). It's very nice and while it sounds great it begs to be dialed in.
Any information, drawings, schematics or associated materials would be truly appreciated.
Thanks in advance,
Brad
Last edited:
Hi, for the bass cabinet you might look here:
Loudspeaker Enclosure
also for the horn:
ƒz�[ƒ“ƒXƒs�[ƒJ�[
Instructions for building:
Speaker Drawings
Network could be JBL 3160
http://www.jblproservice.com/pdf/Network Schematics/3160 Network.pdf
Have fun, Stephan
Loudspeaker Enclosure
also for the horn:
ƒz�[ƒ“ƒXƒs�[ƒJ�[
Instructions for building:
Speaker Drawings
Network could be JBL 3160
http://www.jblproservice.com/pdf/Network Schematics/3160 Network.pdf
Have fun, Stephan
Stephen,
Thanks for the info - the Yuichi link to the box used with the 1601a was especially useful. I now have the appropriate box (still need to do the ports), which is 6 cubic feet.
Since my initial post I have procured a pair of Yuichi 290hz horns, they are TAD clones TD-4001 clones.
I don't think the 3160 will work for a crossover - the TAD 4001 can not be expected to reach down to 500hz reasonably. TAD used a 650hz crossover point - but the interesting thing is the LF driver is has a -36db slope while the HF is down 12db. I would love to know the rationale behind that crossover.
Thanks for the info - the Yuichi link to the box used with the 1601a was especially useful. I now have the appropriate box (still need to do the ports), which is 6 cubic feet.
Since my initial post I have procured a pair of Yuichi 290hz horns, they are TAD clones TD-4001 clones.
I don't think the 3160 will work for a crossover - the TAD 4001 can not be expected to reach down to 500hz reasonably. TAD used a 650hz crossover point - but the interesting thing is the LF driver is has a -36db slope while the HF is down 12db. I would love to know the rationale behind that crossover.
- Status
- Not open for further replies.