Swordfishy/ASPEN FETZILLA power amp

[pinnocchio]

Thanks Do,

Really useful. I have noted this for future designs!

Hugh

'twas a real challenge finding this little part! I must have looked at newark, digikey and mouser whole catalog! 🙂

Ciao!
Do

 

[AndrewT]

It is relatively easy to multi-hole the fuse holder pads, to allow a few PIN variations to be fitted to this universal PCB.
Just like I advise for capacitors. They too come in many pin pitch for similar values.

 

[pinnocchio]

Hi AndrewT,

I know this for sure but I'm just anal about these little details... 😉

Perhaps this is my weakest point!

Ciao!
Do

 

[AKSA]

No, Do, this is a strength. You know the adage, 'The devil is in the detail'.

BTW, that's NOT wearing prada, you gen X guys!!

Hugh

 

[gannaji]

65600001009 Littelfuse Fuseholders, Clips, & Hardware

6.3amp 5x20mm fuse or whatever rating you want to use. This is just an example...
0034.2524 Schurter Fuses

Thanks
Do

Thank you, Do!

 

[pinnocchio]

No, Do, this is a strength. You know the adage, 'The devil is in the detail'.

BTW, that's NOT wearing prada, you gen X guys!!

Hugh

LOL!... 'The devil is in the detail'... Never heard that one before. But then again, you're close to stone age! 😉

 

[AKSA]

Aha, Do, ca va sans dire!!

(I have now exhausted my schoolboy French!)

Hugh

 

[pinnocchio]

Aha, Do, ca va sans dire!!

(I have now exhausted my schoolboy French!)

Hugh

Very good!

Now you can use Google translator for the rest of it with moderate results... 😉

Are you planning a 3rd group buy? I would buy another 3 boards with parts

Ciao!
Do

 

[pinnocchio]

Very good!

Now you can use Google translator for the rest of it with moderate results... 😉

Are you planning a 3rd group buy? I would buy another 3 boards with parts

Ciao!
Do

Hugh!

You still alive?

By the way it was really good French! The Google translator was for the other French stuff. But you won't find the nice French Canadian curse words in there! 😉

Do

 

[AKSA]

HI Do,

Still here..... a THIRD group buy?

Heck, don't think so!

However, never say die. Who thinks this design has the legs for another 100 pcbs?

Ah, the swear words, aren't they wonderful? But I'm told the best are in Russian and Arabic......

Hugh

 

[koldby]

I for one would be interested i at least 4 pcb´s.
Koldby

 

[AKSA]

Thanks Koldby,

I will bear this in mind, hopefully others will come forward expressing interest, I may go ahead and do GB #3, but at this stage of course no promises.

Hugh

 

[pinnocchio]

Thanks Koldby,

I will bear this in mind, hopefully others will come forward expressing interest, I may go ahead and do GB #3, but at this stage of course no promises.

Hugh

So, so far we have 7 boards requested!

Any other takers!

Ciao!
Do

 

[pinnocchio]

Oh well... Looks like the third GB won't happen too soon... 🙁

Do

 

[bbe]

Hi,
would be interested in at least 2 pcb´s.

So that makes it 9.

 

[hoxuanduc]

2 for me. Thanks, Duc

 

[pinnocchio]

We're at 11 so far!

Keep coming! Hugh will be extremely happy! 😀😀😀

Do

 

[AKSA]

Hmmm,

I will start moving on this when we are at 30 boards, this OK with you guys?

HOWEVER, we need more reports on the sound quality from guys who have built the FetZilla; this will remove doubt and stimulate orders!!

Thanks for the continuing interest, guys, this is stacking up as one of the most successful GBs on the DIYaudio forum, I'm actually amazed.....

Tres bien, M. Dominic!!

Hugh

 

[woodturner-fran]

Sorry guys to be a non-searching PITA, but did we ever get a final BOM with Mouser or Farnell numbers?

Fran

 

[AKSA]

Fran,

We did get a few parts, I think from Ken Lewis IIRC, go back through the original thread, I will have a look also later today but unfortunately I have to go see a customer right now...

Hugh