Suggestions for switch replacement

[sci85]

Hi folks,

I'm having issues with the High cut filter push button switch on my Mitsubishi DA-R20. I've tried cleaning it multiple times but it still wants to be a problem child. I could easily just bypass it but would like to replace it if possible but I can't locate one. Any suggestions on a suitable replacement option? The svcs manual shows it as part M07461455 if that helps at all.

Thanks!

 

[MAAC0]

Tried Fleabay ? I'm sure many manufacturers used the same types. Try searching for other brands.

 

[Enzo]

Looks like a common DPDT push switch. GO to Digikey search, DPDT pushswitch throughhole right angle mount. Explore the results. There are a couple common sizes, so verify.
Pushbutton Switches | Switches | DigiKey

This looks like a likely candidate:
F2UEE C&K | Switches | DigiKey

 

[sci85]

Excellent. Thanks Enzo. Appreciate the help

I see a ton of choices. Looks like an on-on from the schematic. Any guidance on current and voltage rating for these?

 

[Enzo]

I can't imagine that voltage or current would be an issue. On a little solid state preamp circuit, the voltages are not high, and currents are microscopic.