Okay. So if i get a port, and do the following, i wont necessarily have problems with the 1st port resonance? I looked at getting a 7cm diameter vent, but the problem is that the air resonance is peaking at 35 m/s. Question is then what is more important.
That depends from the level you will drive the woofers with.
7 cm seems a bit low, but may be ok with big roundovers.
Alright yeah. Its only going to get like 60-70w, but the 1st port resonance get down to about 2500 hz with an 9 cm wide port
Those driver is not suitable for two way, look at 10db scale, peaks in midrange have +-5db nonlinearity, it will not sound nice in two way. Those woofer reguire minimum 2nd order @250Hz and crossing higher than that is not very nice, even going two way you will need very complicated crossover which is probably twice the price of your woofer+tweeter, Why not look at Troels Gravesen site, he have many nice designs with that woofer? E.g. http://www.troelsgravesen.dk/Faital-3WC-10.htm
If you realy need something extremely cheap go woofer without crossover at all and just add 1uF in series to an tweeter you find suitable for you, e.g. https://www.audiophonics.fr/en/twee...dome-tweeter-50w-8-ohm-93db-o30mm-p-1223.html
If you realy need something extremely cheap go woofer without crossover at all and just add 1uF in series to an tweeter you find suitable for you, e.g. https://www.audiophonics.fr/en/twee...dome-tweeter-50w-8-ohm-93db-o30mm-p-1223.html
Last edited:
Ill just stick with the woofer, thanks. The project is not something i want to make complicated. It is an outdoor speaker, that i want some decent sound out off. I already have a speaker with raal 70-20xr am, purifi mid and audiotechnology 12", so really what im looking for is just something decent for the garage and outdoor.