Disabled Account
Joined 2003
Hello all,
I'm looking for a subwoofer project featuring this woofer. Has any sucessfully built a subwoofer with this driver?
I am interested in a replicating your successful design.
Vented or sealed is fine, but I hope I can get decent extension and SPL in a box <~50L. But preliminary inspection of T/S parameters suggests quite a large box size.
I have thought about modelling with LspCAD or winISD and kist going for it, but I don't have measuring equipment, am wary about using manufacturer specs and using maths to do port tuning.
I'm looking for a subwoofer project featuring this woofer. Has any sucessfully built a subwoofer with this driver?
I am interested in a replicating your successful design.
Vented or sealed is fine, but I hope I can get decent extension and SPL in a box <~50L. But preliminary inspection of T/S parameters suggests quite a large box size.
I have thought about modelling with LspCAD or winISD and kist going for it, but I don't have measuring equipment, am wary about using manufacturer specs and using maths to do port tuning.
A friend of mine has a pair of these. He has put them in ~65 ltrs closed boxes (65 ltr each). -3dB is somewhere in the '30s and it sounds really clean and tight. If you want more/deeper bass you can get them down to 25 Hz or below but you need a box of 120-130 ltr IIRC🙁
/U.
/U.
- Status
- Not open for further replies.