Subwoofer Enclosure ?

[Ford_V6]

Hy.

I have this driver :

Specs :
Brand: Senon
Model- DYF1270-35
Size - 12"
Magnet weight - 60oz
Voice Coil - 2"
Max.Power - 300W
Frequency Response - 30-1KHz
Sensitivity - (1W/1M): 92dB

Now i need a schematic for a box. I only have some designs for 10" 's.

Can somebody help me out with a good 12" design of a box ?

Thanks in advance.

 

[7V]

There's not really enough information there to calculate the size and type of box required.

However, they seem to have a web site:Hua Chang Electronics Components Company. I suggest that you send them an email (there's a link at the bottom of the page) and ask them for the Thiele-Small Parameters of this drive unit. These are the driver specifications that are generally used to calculate box volumes, port lengths, etc. and they should know these. If not, just ask them their recommendations for box size and type.

Please let us know what the outcome is.

Good luck
Steve

 

[Ford_V6]

Thanks.

The website of the manufacturer is www.chinaspeaker.com (stamped on the driver ). I will try to get in touch with them. Thanks again