Hello to the DIY community!
Long time lurker here. Im looking into making some small sealed and/or vented and/or tapped horn active subs. Just testing the waters and seeing if there is a market where I am for selling high end sub sound for cheaper then the shops. At the moment Im designing my own compact tapped horn and trying to come up with a reasonable budget. Which takes us to my question. I havecome accross this plate ampmifier:
New Assembled High-Power 280W Digital HIFI Subwoofer Amplifier Board Black+ X7H3 192090130320 | eBay
Just looking at the pictures I can see it doesnt come with terminates wires like the dayton plate amps. Just wondering if its a complex thing to wire to a driver and where I could find info in that. I have decent soldering skills but thats all. Does anyone here know how to wire up a setup like that?
If this is in the wrong forum just let me know and I will move it along.
-Cullin
Long time lurker here. Im looking into making some small sealed and/or vented and/or tapped horn active subs. Just testing the waters and seeing if there is a market where I am for selling high end sub sound for cheaper then the shops. At the moment Im designing my own compact tapped horn and trying to come up with a reasonable budget. Which takes us to my question. I havecome accross this plate ampmifier:
New Assembled High-Power 280W Digital HIFI Subwoofer Amplifier Board Black+ X7H3 192090130320 | eBay
Just looking at the pictures I can see it doesnt come with terminates wires like the dayton plate amps. Just wondering if its a complex thing to wire to a driver and where I could find info in that. I have decent soldering skills but thats all. Does anyone here know how to wire up a setup like that?
If this is in the wrong forum just let me know and I will move it along.
-Cullin
Well if you're building a subwoofer, I guess you are in the right place 🙂
The first picture of the amp looks like the amplifier section is in the left. And between the blue caps is a white connector, that's my guess for the output connector. The other white connector looks a bit small for an output.
The first picture of the amp looks like the amplifier section is in the left. And between the blue caps is a white connector, that's my guess for the output connector. The other white connector looks a bit small for an output.
Thanks Nenola!
That looks like the spot. Here is another picture with wires connected to that terminal. It looks like the black one is grounded off on the component. Is that right? Would I just connect the black and red wires from the driver to this white connector and the rest is sorted out? Sorry for the ignorance. I have never dealt with an active speaker before.
Here are better pictures of the same amp, with wires in that connector. Im not suee of they are just coiled up and not going anywhere or if the black one connects there.
MCU 280W Assembly High-Power Digital HIFI Subwoofer Amplifier Board Bass 6492090108201 | eBay
- Status
- Not open for further replies.