Can somebody please post a picture of a Styroflex capacitor. I am rebuilding a valve amp and 1 recomendation is that I use this cap for the feedback resistor bypass. My problem is that I don't know them and the local supplier also don't know this type. Else , what can I use in it's place that will give same or better performance? Also what voltage rating should it be for this application?
Thanx for all help.
Thanx for all help.
Styroflex is a registered trademark from BASF.
When used in capacitors, whe are talking about polystyrene
caps.
As bypass C, you can also use sivered mica, or the easyest, best and cheapest is twisted wire.
http://www.diyaudio.com/forums/showthread.php?postid=150979#post150979 Look at the green and red wires on the picture.
Some useful link:
https://worldaccount.basf.com/wa/Pr...stics/Products/styroflex/processing.xdoc?r=EU
/Hugo
When used in capacitors, whe are talking about polystyrene
caps.
As bypass C, you can also use sivered mica, or the easyest, best and cheapest is twisted wire.
http://www.diyaudio.com/forums/showthread.php?postid=150979#post150979 Look at the green and red wires on the picture.
Some useful link:
https://worldaccount.basf.com/wa/Pr...stics/Products/styroflex/processing.xdoc?r=EU
/Hugo
Attachments
- Status
- Not open for further replies.