Stripping a Vusys HD14a 1200x800 LCD

Status
Not open for further replies.
A while back i got a Vusys HD14a and it turned out to be a really good panel for build a projector. The resolution is 1280 x 800, there is also a 1280x768 edition but i got lucky. It's a 14.1" widescreen so the width is pretty much the same as a regular 15" XGA screen so no need for fancy wide angle lenses.

The screen is pretty nice, one of those glossy finish types. The first thing i noticed was it's only backlit from one edge and the viewing angle is poor. I took it apart and suprise suprise it's a laptop screen with a LVDS controller board. It's perfect for an LCD projector! The flat connectors are all along one edge and being a laptop display there's a nice long wire to the controller board (which is very small). I'm just wondering if I can find any smaller LVDS screens i can hook upto it?!

I looked up the controller chip and it's a Genesis gmZAN3SL, from what i've read so far it's capped at 1280 x 1024 resolution


An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.


The best bit is you can pick them up new for about £70!
 
Status
Not open for further replies.