SSM2019 mic preamp + rod elliott phantom psu HELP!
Hi audio guru's, i recently took the red "audio electronics" pill, and i can't get out of the rabbit hole .
To be honest, i'm an youtube self taught "schematics reader", and audio production enthusiast... i can solder, read schematics and make simple circuits. Please help.
I have read almost all posts about ssm2019 mic preamp...compared to ina217 threads... it's scarce. Can you give me the link of the most complete ssm2019 mic preamp circuit?....but....my question is about input protection and input capacitors of ssm2019, because the Rod Elliott's phantom power circuit (i already build) have 22uf bipolar capacitors alongside with 10v protection diodes after the 6.8k resistors (i will post the circuits). What's the best way to implement that to datasheet schematic....and what's the value of CG capacitor? I plan to use 10k pot in series with 10ohm resitor for gain( it's 60db than, right? ). After reading lots of Mr. Jim Williams suggestions i went for ssm2019.
I have built bipolar power supply also, lm317/lm337 based. Need help about this mic pre.
Please help.
Sorry for my bad English, I'm from Serbia.
All the best in this world.
Hi audio guru's, i recently took the red "audio electronics" pill, and i can't get out of the rabbit hole .
To be honest, i'm an youtube self taught "schematics reader", and audio production enthusiast... i can solder, read schematics and make simple circuits. Please help.
I have read almost all posts about ssm2019 mic preamp...compared to ina217 threads... it's scarce. Can you give me the link of the most complete ssm2019 mic preamp circuit?....but....my question is about input protection and input capacitors of ssm2019, because the Rod Elliott's phantom power circuit (i already build) have 22uf bipolar capacitors alongside with 10v protection diodes after the 6.8k resistors (i will post the circuits). What's the best way to implement that to datasheet schematic....and what's the value of CG capacitor? I plan to use 10k pot in series with 10ohm resitor for gain( it's 60db than, right? ). After reading lots of Mr. Jim Williams suggestions i went for ssm2019.
I have built bipolar power supply also, lm317/lm337 based. Need help about this mic pre.
Please help.
Sorry for my bad English, I'm from Serbia.
All the best in this world.
Attachments
Last edited:
THAT has plenty of interesting app notes about protection from phantom power. Read :
http://www.waynekirkwood.com/images/pdf/Phantom_Menace.pdf
http://www.waynekirkwood.com/images/pdf/The_48_Volt_Phantom_Menace_Returns_THAT_Version.pdf
http://www.thatcorp.com/datashts/dn140.pdf
I've also posted a schematic for the ssm2019 here: Small mic preamp
http://www.waynekirkwood.com/images/pdf/Phantom_Menace.pdf
http://www.waynekirkwood.com/images/pdf/The_48_Volt_Phantom_Menace_Returns_THAT_Version.pdf
http://www.thatcorp.com/datashts/dn140.pdf
I've also posted a schematic for the ssm2019 here: Small mic preamp
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.