Anyone know why there's such a big discrepancy between the two drivers for the Mms measurement? The 4 ohm version says its Mms is 98.6 g, the 8 ohm version says its Mms is 50.5 g. Can these numbers be trusted?
Dayton Audio - RS270-4 10" Reference Woofer 4 Ohm
Dayton Audio - RS270-8 10" Reference Woofer 8 Ohm
Dayton Audio - RS270-4 10" Reference Woofer 4 Ohm
Dayton Audio - RS270-8 10" Reference Woofer 8 Ohm
It's very unlikely that the 4 ohm version has a higher Bl than the 8 ohm version (12.1 versus 10.3 N/A). Usually it's the other way round. I think there's something wrong. 😕
Someone else's measurements of the RS270-8 show 39.4 g. Hmm...
FS Dayton RS 270-s 8 -
Techtalk Speaker Building, Audio, Video Discussion Forum
These are the obsolete shielded versions though.
More: Grand Comparatif de 10 pouces Partie 1 - JustDIYIt !
Seems like the parameters are not to be trusted.
FS Dayton RS 270-s 8 -
Techtalk Speaker Building, Audio, Video Discussion Forum
These are the obsolete shielded versions though.
More: Grand Comparatif de 10 pouces Partie 1 - JustDIYIt !
Seems like the parameters are not to be trusted.
Last edited: