Hi! I am making a mesa boggie mark II diy. I made almost parts and I already test of the pré amplifier. I made transformer of power.
So, I still missing the output transformer and inductors of EQ.
Does anyone have the specification of output transformer? I'll wind the transformer myself.
So, I still missing the output transformer and inductors of EQ.
Does anyone have the specification of output transformer? I'll wind the transformer myself.
Actually I got a little confused. To calculate I need the input voltage on the valve plates, right? And having the reflected impedance of the valve +- 4000k 6l6 and El34?
This is a 6L6 pair?
Refer to RCA datasheet.
Im not sure you really want 80/100 watt output section.
For a live band running full tilt usually you want the classic 40 watt pair.
EL34 are used for quicker breakup.
And even then it is massive loud.
Mesa Boogie rather notorious for using rather small spongy transformer that saturate easy.
So any after market transformer is a upgrade.
Refer to RCA datasheet.
Im not sure you really want 80/100 watt output section.
For a live band running full tilt usually you want the classic 40 watt pair.
EL34 are used for quicker breakup.
And even then it is massive loud.
Mesa Boogie rather notorious for using rather small spongy transformer that saturate easy.
So any after market transformer is a upgrade.
- Home
- Live Sound
- Instruments and Amps
- Specification Mesa Boggie output transformer mark II simulclass