For sale, a pair of large speakers, I built, around three years ago. These haven’t seen much use, probably between 2 to 300 hours. They have passive crossovers built-in, I originally use them with an active set up but passive is easier to just plug and play. I used only Jantzen coils and caps, they are all nice quality, also resistors from jantzen.
sound great on everything from my single ended KT88 amp to my hypex stuff, very sensitive, and the waveguide is a gem. Patrick Bateman said it was literally the best measuring waveguide he’d ever seen. It’s built like a tank, nice and solid, and I have damped the back with bitumen pads.
The speakers are built from 18 mm Baltic birch, with Neutrik speak-on connectors. An internal brace supports the magnet for the waveguide so there’s no stress on the waveguide itself.
Basically, these sound fantastic, but we have a new baby, a 2 1/2 year-old, an 11-year-old, and there’s no way these will survive in the living room. I’ve had them stored away in an extra bedroom for the last two years, it’s a shame for them to just sit.
I would truly hate to have to break these up, but I will if I have to....
I’m located about 45 minutes outside of Vienna.
Feel free to get in touch If you wanna audition them.
These need to find a good home.
1200 euros
sound great on everything from my single ended KT88 amp to my hypex stuff, very sensitive, and the waveguide is a gem. Patrick Bateman said it was literally the best measuring waveguide he’d ever seen. It’s built like a tank, nice and solid, and I have damped the back with bitumen pads.
The speakers are built from 18 mm Baltic birch, with Neutrik speak-on connectors. An internal brace supports the magnet for the waveguide so there’s no stress on the waveguide itself.
Basically, these sound fantastic, but we have a new baby, a 2 1/2 year-old, an 11-year-old, and there’s no way these will survive in the living room. I’ve had them stored away in an extra bedroom for the last two years, it’s a shame for them to just sit.
I would truly hate to have to break these up, but I will if I have to....
I’m located about 45 minutes outside of Vienna.
Feel free to get in touch If you wanna audition them.
These need to find a good home.
1200 euros
Attachments
-
IMG_1218.jpeg819.2 KB · Views: 183
-
IMG_1219.jpeg719.9 KB · Views: 169
-
IMG_1220.jpeg736.1 KB · Views: 158
-
IMG_1221.jpeg682.8 KB · Views: 143
-
IMG_1222.jpeg700.6 KB · Views: 141
-
IMG_1224.jpeg715 KB · Views: 154
-
IMG_1226.jpeg732.7 KB · Views: 147
-
IMG_1225.jpeg746.7 KB · Views: 134
-
IMG_1227.jpeg842.2 KB · Views: 127
-
IMG_1228.jpeg782.6 KB · Views: 128
-
IMG_1229.jpeg864.8 KB · Views: 156
Last edited:
There’s been a few questions, shipping would be possible, but it would be expensive. They would need to be on a EURO palette each.
perhaps inside of Europe, not too far from austria would be ok.
Outside of Europe would make no sense at all…..
perhaps inside of Europe, not too far from austria would be ok.
Outside of Europe would make no sense at all…..
To clear up some more questions:
Yes, these can be shipped, but you will have to organize shipping on your end. I can’t give quotes on shipping, and in fact, I would prefer these be picked up, I’m also considering splitting them up.
That means there would be an offer, a pair of the faitalPRO 15PR400, a pair of denovo DNA-360 compression drivers, and a pair of the QSC wave guides.
It would be a shame, though, the speakers are quite nice and work very well together. Plus, there is quite a bit of money and time in the enclosures.
To answer other questions, yes, there is a pass, crossover, built-in, all film, caps, and crossover around 1050 Hz. If you would like I can send a WhatsApp video of them playing.
Thanks again for all the interest guys. Let me know if there are any other questions.
Yes, these can be shipped, but you will have to organize shipping on your end. I can’t give quotes on shipping, and in fact, I would prefer these be picked up, I’m also considering splitting them up.
That means there would be an offer, a pair of the faitalPRO 15PR400, a pair of denovo DNA-360 compression drivers, and a pair of the QSC wave guides.
It would be a shame, though, the speakers are quite nice and work very well together. Plus, there is quite a bit of money and time in the enclosures.
To answer other questions, yes, there is a pass, crossover, built-in, all film, caps, and crossover around 1050 Hz. If you would like I can send a WhatsApp video of them playing.
Thanks again for all the interest guys. Let me know if there are any other questions.
So, last chance, then these are getting split up. Come on guys, this is a monster speaker, save them from the butcher!!!!😱
Yes, I desperately want to avoid that. But I have a deadline, and they have to go….. unless I can work a miracle and talk my wife into keeping them😅