speaker terminals

[jfet]

hello everyone , can you help me I'm looking for speaker terminals for Ground Zero GZCA 8.0K spl
see. thanks

 

[Lingo]

Try contacting someone in China. I was looking for a speaker terminal for a JBL GTO1004, and I found one from a supplier in my area who was in contact with someone in China

 

[HumbleDeer]

The best I can actually come up with is just scraping the solder mask off which-ever of the traces it was that connected to the hole, putting one of these on the board with a brass screw and nut, and flooding it with solder. The original type does exist, but I can't find it on Ali (I literally searched for two and a half hours, so I give up.) https://www.aliexpress.com/item/1005008920314323.html

 

[Lingo]

The best I can actually come up with is just scraping the solder mask off which-ever of the traces it was that connected to the hole, putting one of these on the board with a brass screw and nut, and flooding it with solder. The original type does exist, but I can't find it on Ali (I literally searched for two and a half hours, so I give up.)

Find someone in China who knows the electronic market there and is willing to buy and send it to you. Most of these parts are not available on AliExpress.

 

[HumbleDeer]

All good and well Lingo. That was just my suggestion besides yours. That gives OP the option to do something else than hunt down the exact part if they need this fixed quickly.

 

[Lingo]

All good and well Lingo. That was just my suggestion besides yours. That gives OP the option to do something else than hunt down the exact part if they need this fixed quickly.

You're completely right HumbleDeer.
I thought the reply was from the owner of the thread😅