HolmImpulse is good, simple to use and free of charge. ARTA is top of the line but more complex and has free version (everything works except for save).
HOLM Acoustics
HOLM Acoustics
Does anybody know if Akabak works on Windows 7??
Only in Windows XP mode. Or on XP running in another Virtual Machine, i.e. VirtualBox.
That's how it works for me.
I'm considring this one at the moment. Cheap and incl. mic and jig for impedance
ATB PC Pro Audio analyzer PC measurement test-DVD CD speaker SPL THD RTA developement setting
I use Holm at the moment, and that is very intuitive
ATB PC Pro Audio analyzer PC measurement test-DVD CD speaker SPL THD RTA developement setting
I use Holm at the moment, and that is very intuitive
I have this, which I think is pretty slick, though at $298 is a bit overbudget...
Dayton Audio OmniMic V2 Precision Measurement System 390-792
I did have to get the WT-3 extra.
Dayton Audio OmniMic V2 Precision Measurement System 390-792
I did have to get the WT-3 extra.
Hi and thanks for all the answers, its much appreciated!
i have downloaded holm and it works, but only have a db meter right now. now i just have to get my mic and mic amp back from a friend.
well that and try to understand how to make valid measurements in room so i can get my digital xover dialed in right.
can anybody suggest som reading that will help me in my "quest"?
best regards
panduro
i have downloaded holm and it works, but only have a db meter right now. now i just have to get my mic and mic amp back from a friend.
well that and try to understand how to make valid measurements in room so i can get my digital xover dialed in right.
can anybody suggest som reading that will help me in my "quest"?
best regards
panduro
Some reading on measurements in danish
HIFI4ALL.DK | Indsigtsartikler | Lyd & Højttalerbyg - 7. del
and english dedicated to Holmimpulse
Red Spade Audio: How to measure your crossover with Holm Impulse
HIFI4ALL.DK | Indsigtsartikler | Lyd & Højttalerbyg - 7. del
and english dedicated to Holmimpulse
Red Spade Audio: How to measure your crossover with Holm Impulse
REW
I use REW ,
It's free and works very well , you can download it here :
REW - Room EQ Wizard Home Page
You can also measure TS parameters pretty accurate .
They have calibration files for a lot of SPL meters .
I use it with a Behringer UCA202 USB sound card and get very nice measurements for a few bucks !
I measured my Tannoy 3809's and the TS parameters are spot on .
Cheers ,
Rens
I use REW ,
It's free and works very well , you can download it here :
REW - Room EQ Wizard Home Page
You can also measure TS parameters pretty accurate .
They have calibration files for a lot of SPL meters .
I use it with a Behringer UCA202 USB sound card and get very nice measurements for a few bucks !
I measured my Tannoy 3809's and the TS parameters are spot on .
Cheers ,
Rens
Hi - before I delve into REW - I was wondering if it can be used to generate FRD and ZMA files? Looks like it captures SPL and phase - so FRD should be possible, and it captures TS parms - can it do ZMA files?I use REW ,
It's free and works very well , you can download it here :
REW - Room EQ Wizard Home Page
You can also measure TS parameters pretty accurate .
They have calibration files for a lot of SPL meters .
I use it with a Behringer UCA202 USB sound card and get very nice measurements for a few bucks !
I measured my Tannoy 3809's and the TS parameters are spot on .
Cheers ,
Rens
thanks
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- speaker measurement software windows 7