Does anyone know a good source to buy BIG strips of bare
copper PCB, one side only?
Any surplus company on the Net perhaps? I've been searching
Google but nothing comes up as a surplus co., of course I'm
looking for remnants.... If there such thing as remnants PCB
stock.....
Anyway, any help would be appreciated.
copper PCB, one side only?
Any surplus company on the Net perhaps? I've been searching
Google but nothing comes up as a surplus co., of course I'm
looking for remnants.... If there such thing as remnants PCB
stock.....
Anyway, any help would be appreciated.
Big strips of PCB
I'm talking about strips of 2-3" by 30 to 36".
E-mail me directly at
jmateus@tellurian.com
Thanks
I'm talking about strips of 2-3" by 30 to 36".
E-mail me directly at
jmateus@tellurian.com
Thanks
PCB copper strips
Thanks for the input.
What I want the strips for can acomodate 2 x 18", come to
think of it. Of course that will depend of:
1. Price
2. The width
3. The thikness (1/16", I suppose)
So please supply me the price for around 20 or 25 strips, assuming the with is about 2 or even 3 inches
Thanks
Thanks for the input.
What I want the strips for can acomodate 2 x 18", come to
think of it. Of course that will depend of:
1. Price
2. The width
3. The thikness (1/16", I suppose)
So please supply me the price for around 20 or 25 strips, assuming the with is about 2 or even 3 inches
Thanks
Strips of PCB
When I mencioned strips I thought that was what you had, strips.
But that's fine, I knew I had to cut them and that's what is
possibly going to be, those 10" cut in STRIPs.
I don't mind to have double sided ones, except one of the
sides is not going to be used.
So please give your quote for 3 or 4, like I said, depending on
price.
Thanks
When I mencioned strips I thought that was what you had, strips.
But that's fine, I knew I had to cut them and that's what is
possibly going to be, those 10" cut in STRIPs.
I don't mind to have double sided ones, except one of the
sides is not going to be used.
So please give your quote for 3 or 4, like I said, depending on
price.
Thanks
Hi, I'm not too sure if this will be any use to you but the guy said he was willing to ship to the Us so I guess you could drop him an e-mail. I got four of these sheets a few weeks ago at a rediculasly low price and I am guessing he may have some left. Try clicking on the link below to see what I got and you should be able to mail him from there.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2535175920&category=4660&rd=1
Andrew.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2535175920&category=4660&rd=1
Andrew.
Hi, if you don't want to deal with the guy, i could get a hold of them for you and post them on to the USA cut up into the sizes you want (I imagine it would cost about $20 plus shipping for one 42 X 45 inch sheet cut up into the correct sizes). But one sheet would get you enought to cover the four 3 X 30 inch strips that you wanted, plus quite a bit extra spare.
Andrew.
Andrew.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- Source for surplus PCB