Good morning everyone,
I purchased this power acoustik razor RZR1-2500D amp from Walmart, I had a friend of mine set up the amp . I come to find out that the amp isn't giving no sound and the amp is on protection mode. Can someone please guide me the right way.
I purchased this power acoustik razor RZR1-2500D amp from Walmart, I had a friend of mine set up the amp . I come to find out that the amp isn't giving no sound and the amp is on protection mode. Can someone please guide me the right way.
Attachments
the gnd wire should have a decent copper crossection, at least the same as the 12V+ wire. insulation thickness does not count.
Why, why do you have the rca AND high level inputs connected ?
Maybe find a place that does car audio installations and get them to install your Car Audio amplifier correctly.
Or at the very least, use your internet to search for the owners manual which should show you how to connect it properly.
Oh and while I'm at it, this web site has a dedicated Car Audio section, maybe post there for your car audio questions.
Maybe find a place that does car audio installations and get them to install your Car Audio amplifier correctly.
Or at the very least, use your internet to search for the owners manual which should show you how to connect it properly.
Oh and while I'm at it, this web site has a dedicated Car Audio section, maybe post there for your car audio questions.
A friend of mine install it, I read the manual and said the same thing...it says not to have them on at the same time.