sony psone help

[blackie]

I read I guess every post on this ps1,, maybe someone can help a newbe pleasssssse
ok I've tried every wire there is still no pitcher just sound
Now to run a wire for video from phono jack do I remove every thing or just the cover where the jacks are all help is needed
thanks Guys
Blackie😕

 

[bobo1on1]

The original psone screen needs 5 volt on pin 10 to switch on.
Check this link http://nakoruru.rudora.net/carcomp/serio_lcd.htm
That's the 3rd time I placed this link on this forum lol.

 

[blackie]

thanks

thanks tat help with all my looking i over looked that
thanks
blackie😱

 

[Poseablejesus]

I didnt have to remove my jacks at all.

The connections were actually exposed on the outside of the inputs.

I just soldered directly onto there.

The pictures are really crummy, but you can see that the jacks are still in place.

 

[Poseablejesus]

Birds eye view of the mess

 

[Poseablejesus]

Well, the pictures didnt show. Maybe because I'm still being moderated.

You can see all of them at

www.geocities.com/tweakerprojects

 

[k.i.t.t]

Hi do i need to make this sort of mod to the xbox screen??

 

[Lowjacker]

all of the psx screens i've just about ever seen have a composite/rca video input....am i just imagining this?...it seems like you would just jack right into this and run with it....am i missing something here?

 

[Poseablejesus]

all of the psx screens i've just about ever seen have a composite/rca video input....am i just imagining this?...it seems like you would just jack right into this and run with it....am i missing something here?

The only thing your missing is that it's a mini jack, doesnt take standard rca.

You either need to rig up a standard RCA in, or have a mini jack converter.

 

[Syn]

Some more questions

I read most of the ' playstation lcd screen' topics (i think) and i still have some questions regarding the original Sony PSX lcd screen. I'm new to the whole DIY projector thing so please don't burn me down 🙂

First of all i would like to know if it works standalone or needs the psone to run. I read that it takes 5volt from the psx-connector, so doesnt that means that the screen cant run alone without modification?

(and if it works stand alone with using just a adaptor, do i have to use a adaptor primairy made for use with psx or can i use any adaptor with the right voltage and ampere?)

Next question is that i read different things about the av-input. I hear its RGB-only, but some say it takes composite aswell. So can anybody give me a final answer to this ? 🙂

Thanks

 

[Motoko]

I'm going for the first time projector using a PSX LCD, i found one on ebay going for £15 including the PSOne lol.

The only thing i'm troubled with is what wattage light would be suitable? i was thinking 150w metal hilde?

 

[Poseablejesus]

SYN-

The screen does not require a playstation to work.

Mine came from the junk pile with an external power supply.

SONY scph-121, 7.5v-3.0 a

If you don't have the original, any power supply with the same volatage could be rigged to work. RadioShack could probably hook you right up.

 

[Motoko]

What sort of Lighting and Lense combination are you guys using with your PSOne LCD?

 

[Syn]

Thanks Poseablejesus, clear answer 🙂

Anybody who can answer my RGB/composite question ?

 

[Lowjacker]

Syn

the only things i've seen are the composite inputs and the VGA mod

the vga mod seems to be easy enough....just some easy soldering and presto change


well........kinda sorta

 

[The Alchemist]

7.5 V, 3 amp?? My screen runs on 7.5V 0.5A.
I cant post any pic's right now beceause my lycos is down, but i use a 70W HQI. 70 watt is enough for 40" but 80" is a little bit dark. I use foil fresnell lenses and a 240mm objective (copier lens).

 

[I_eat_flowers]

@alchemist

yeah it'll work w lower amperage too. the genuine psu delivers upto 3 amps. its not necessary, but you can hook up additional 12 V fans. they'll be not noisy due to running on 7.5V. so i'd recommend the original psu.

 

[Liteyear98]

SYN-

The screen does not require a playstation to work.

Mine came from the junk pile with an external power supply.

SONY scph-121, 7.5v-3.0 a

If you don't have the original, any power supply with the same volatage could be rigged to work. RadioShack could probably hook you right up.

Hey there.

I had the same issue. No power supply. What I did was pull one from a junk playstation (Grey one) and mod it into a box. I also connected RCS jacks to the Mini AV input so it would be easier to connect a multitude of game systems to it.
This is my first post, so please be gentle.

 

[Liteyear98]

Hey there.

I had the same issue. No power supply. What I did was pull one from a junk playstation (Grey one) and mod it into a box. I also connected RCS jacks to the Mini AV input so it would be easier to connect a multitude of game systems to it.
This is my first post, so please be gentle.

I meant RCA (Not RCS) jacks in the previous post. I also attached a picture before, but I think it might have been too big. I have reattached it.

 

[Lowjacker]

i'm pretty much going to do mine the way pj did......

solder to the leads and keep it simple......