I built the Half Chang cabinets for my Pioneer B20. I modified the drivers with two coats of puzzle coat on the main cone and two coats of damar on the whizzer cone. I removed the dust cap and installed a phase plug. The speakers sound great except when I play bluegrass with alot of bass or techno music. Should I remove the whizzer cone? What would you suggest?
I just finished the shadow cabinet with Dayton 8" subs and the suzy chang cabinet with Pioneer A11. I will post a comparison between the half chang and the suzy chang with subwoofer cabinet soon. Thanks
I just finished the shadow cabinet with Dayton 8" subs and the suzy chang cabinet with Pioneer A11. I will post a comparison between the half chang and the suzy chang with subwoofer cabinet soon. Thanks
Howdy tripathdude, did you try the 98 cent tweak yet?
1. http://www.diyaudio.com/forums/showthread.php?postid=1674065#post1674065
2. http://www.diyaudio.com/forums/show...0284#post630284
(98 cent tweak info starts about halfway through the post)
I look forward to your comparisions of the Chang family!
1. http://www.diyaudio.com/forums/showthread.php?postid=1674065#post1674065
2. http://www.diyaudio.com/forums/show...0284#post630284
(98 cent tweak info starts about halfway through the post)
I look forward to your comparisions of the Chang family!
Hey, back to this 98 cent whizzer tweak
I see DD's drawing (of the whizzer tweak), and am wondering if it is a non-glue reversible mod? Does one merely pressure fit the foam between the whizzer and cone and it works?
(Sorry if so many already know the answer--any comment greatly appreciated)
The reason for asking is one of my fe166's seems to make a buzz/rattle on high energy transients in the cello register. That whizzer really dances around at high spl's, and it looks suspicious.
Thanks in advance, dudes/dudettes...
Karl
I see DD's drawing (of the whizzer tweak), and am wondering if it is a non-glue reversible mod? Does one merely pressure fit the foam between the whizzer and cone and it works?
(Sorry if so many already know the answer--any comment greatly appreciated)
The reason for asking is one of my fe166's seems to make a buzz/rattle on high energy transients in the cello register. That whizzer really dances around at high spl's, and it looks suspicious.
Thanks in advance, dudes/dudettes...
Karl
veryoldcat said:Does one merely pressure fit the foam between the whizzer and cone and it works?
Yes.
dave
tripathdude said:when I play bluegrass with alot of bass or techno music.
Techno - OK. But bluegrass with a lot of bass? Must be some new grass I don't know about.
Or maybe you meant "Bass", like the fish.....
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.