How to make g guitar preamp using opamp is a simple but quality? Could you all help me... Please...
guitar pre amp with one op amp? Whaat are you hoping for, input to a computer? input to a power amp?
I would suggest an invertine stage with an input resistor 47k, with a series capacitor of 220nF, then a feedback resistor of 680k with a 22n in series, with a 100p cap in parallel, sorry i cant provide a schematic, but play with capacitor vaules to change the tone. op amp stages are generally quite standard
I would suggest an invertine stage with an input resistor 47k, with a series capacitor of 220nF, then a feedback resistor of 680k with a 22n in series, with a 100p cap in parallel, sorry i cant provide a schematic, but play with capacitor vaules to change the tone. op amp stages are generally quite standard
Sorry about my question, maybe not specific... I have trouble with my language... Including my english writing... I'm just want to be help to make a simple preamps to use at home and want to use with my power amps, cause I don't have much money to buy it, in my country Marshall amps was very very popular but very very expensive for me... So at this forum I want to all member to like to help me even just make me a simple schematic... Thanks before....
Cook Your Own Distortion
this website got me started on pre amps, mainly distortion, but leave out diodes and it works clean too! Marshalls are expensive, il give you that.
this website got me started on pre amps, mainly distortion, but leave out diodes and it works clean too! Marshalls are expensive, il give you that.
The link below is to the schematic of the Marshall Lead 12, sometimes called the mini stack. A very simple preamp that uses a dual opamp.
http://www.el34world.com/charts/Schematics/files/marshall/lead12_12w_3005_5005.pdf
http://www.el34world.com/charts/Schematics/files/marshall/lead12_12w_3005_5005.pdf
Thanks for you all.... In my country is very very hard to find a transistor jfet, is very very complicated to build my own guitar amplifier when all schematics is using jfet... I'm just ready to learn but hard to find a component... When you want to help me please give me advise some opamps guitar preamps schematics... Thanks before....
You might want to learn beasic electronics first.
And they have jfets if they have opamps...
Jfets are very basic components, they might have a different type name (like in russia)
Op-amps theres the TL series (081,2,4/071,2,4/741)
LM series
Cant say much on JFETs,
but i often use bc547 NPN transistors with reasonable success
LM series
Cant say much on JFETs,
but i often use bc547 NPN transistors with reasonable success
Does any one want help me to make PCB from this scematic......
Cause when I finish make the schematic then I cant use tool switch to board eagle layout...... Please.... Cause I finally found some fet tansistor like J201 and MPF102, but I can make the pcb.... I try to make to perfboard but always failed.... please help me....
An externally hosted image should be here but it was not working when we last tested it.
Cause when I finish make the schematic then I cant use tool switch to board eagle layout...... Please.... Cause I finally found some fet tansistor like J201 and MPF102, but I can make the pcb.... I try to make to perfboard but always failed.... please help me....
Attachments
- Status
- Not open for further replies.