Hi all,
I have the sigma schematic but don't have any other information about it. There is some body that built it?
I know that some members had some specs about it.
So, help will be appreciate it
Best regards
Williams
I have the sigma schematic but don't have any other information about it. There is some body that built it?
I know that some members had some specs about it.
So, help will be appreciate it
Best regards
Williams
> SinPower-------- 160W RMS/8 oma ; 225W RMS/4 oma
> MUsicPOwer (IHF)- 210W RMS/8 ohm ; 300W RMS/4
> FReq.---- 10Hz-105KHz (-3dB THD below 0.005%)
> THD------------------ 0.004% na 100W RMS/8 ohm
0.008% na 180W RMS/8 ohm
0.009% na 240W RMS/4 ohm
> TIM------------------- 0.005% na 140W RMS/8 ohm (50Hz/7KHz 4:1)
> S/N--- >100dB (100W RMS)
> Slew rate-------------115V/uS
> Damping faktor------->450 na 150W RMS/8 ohm
These are the specs...
SIgma is a high quality amp,I didn`t built it or listened to this amplifier but I`m shure it is a good and stable.
cheers!
> MUsicPOwer (IHF)- 210W RMS/8 ohm ; 300W RMS/4
> FReq.---- 10Hz-105KHz (-3dB THD below 0.005%)
> THD------------------ 0.004% na 100W RMS/8 ohm
0.008% na 180W RMS/8 ohm
0.009% na 240W RMS/4 ohm
> TIM------------------- 0.005% na 140W RMS/8 ohm (50Hz/7KHz 4:1)
> S/N--- >100dB (100W RMS)
> Slew rate-------------115V/uS
> Damping faktor------->450 na 150W RMS/8 ohm
These are the specs...
SIgma is a high quality amp,I didn`t built it or listened to this amplifier but I`m shure it is a good and stable.
cheers!
Dr.Bora's amp
Write to Bora. He is truly very helpfull person.
I am sure he will help you with pcb and contruction. His designs are very good sound.
Cheers.
Write to Bora. He is truly very helpfull person.
I am sure he will help you with pcb and contruction. His designs are very good sound.
Cheers.
Very nice Victor....if possible, please, post the schematic for us too.
Good work....nice and clean construction.
Dr. Bora is a very good guy...i apreciate him a lot.
regards,
Carlos
Good work....nice and clean construction.
Dr. Bora is a very good guy...i apreciate him a lot.
regards,
Carlos
Carlos,
Here is the schematic:
http://bas.elitesecurity.org/mojiprojekti1.html
I cannot buy those MOSFETs from local suppliers here in the US, as none of them seems to have them in stock. I wonder if you can get them in Brazil.
Here is the schematic:
http://bas.elitesecurity.org/mojiprojekti1.html
I cannot buy those MOSFETs from local suppliers here in the US, as none of them seems to have them in stock. I wonder if you can get them in Brazil.
!
I will buy 2SK1058 and 2SJ162 from digikey.In my country it is not possible to find original...
grimberg said:Carlos,
Here is the schematic:
http://bas.elitesecurity.org/mojiprojekti1.html
I cannot buy those MOSFETs from local suppliers here in the US, as none of them seems to have them in stock. I wonder if you can get them in Brazil.
I will buy 2SK1058 and 2SJ162 from digikey.In my country it is not possible to find original...
!
I have not sent pictures to carlos!It's just one picture on forum.
Williams Audio said:hi viktor,
i can't see the pictures you sent to carlos ??
can you send these again
williams
I have not sent pictures to carlos!It's just one picture on forum.
Thank you Grimberg and thank you Victor 1986
Bonito o emblema do Senta a Púa Grimberg...eu gostei muito.
Pretty that sign of second world war Brazilian aircraft Grimberg.
.......................
Thank you Victor1986.... from time to time i use to send and receive mails to and from Doctor Bora....he is very nice... a little busy too.
regards,
Carlos
Bonito o emblema do Senta a Púa Grimberg...eu gostei muito.
Pretty that sign of second world war Brazilian aircraft Grimberg.
.......................
Thank you Victor1986.... from time to time i use to send and receive mails to and from Doctor Bora....he is very nice... a little busy too.
regards,
Carlos
Re: Thank you Grimberg and thank you Victor 1986
Yes,Bora is really nice guy and busy.He was sick and he was in hospital,but now is OK.I will attach picture's soon,I finished chasis for Sigma amplifier,capacitor's are F&T 2*30000uF for stereo,transformer 750VA...
destroyer X said:
Bonito o emblema do Senta a Púa Grimberg...eu gostei muito.
Pretty that sign of second world war Brazilian aircraft Grimberg.
.......................
Thank you Victor1986.... from time to time i use to send and receive mails to and from Doctor Bora....he is very nice... a little busy too.
regards,
Carlos
Yes,Bora is really nice guy and busy.He was sick and he was in hospital,but now is OK.I will attach picture's soon,I finished chasis for Sigma amplifier,capacitor's are F&T 2*30000uF for stereo,transformer 750VA...
- Studio or sigma ? -
Hi Viktor, how sound the sigma amplifier is it différent of a studio ?
Which is your favorite ?
Thanks by advance😉
Hi Viktor, how sound the sigma amplifier is it différent of a studio ?
Which is your favorite ?
Thanks by advance😉
Re: - Studio or sigma ? -
I still don't know!I need to buy 2SK1058 and 2SJ162 and then I will tell you.
SDF said:Hi Viktor, how sound the sigma amplifier is it différent of a studio ?
Which is your favorite ?
Thanks by advance😉
I still don't know!I need to buy 2SK1058 and 2SJ162 and then I will tell you.
I have sent a mail to Bora, asking his presence
But i am "feeling"...sniffing...that Bora is sick.
Can someone inform what is going on with Bora....his daddy passed away some monthes ago...but i am having concerns about his own health.
I have invited him to come to us...but i do not know if he is strong enougth to do that.
Bora used to "surf" the internet....once he found Brazilians talking inside one of our foruns...talking about him....he came to me asking me translations....so...he use to track everything that is connected to his name and amplifiers.
I have strong concerns.... i hope someone can inform something about Bora.....VICTOR!!!!...please, do you know something?
regards,
Carlos
But i am "feeling"...sniffing...that Bora is sick.
Can someone inform what is going on with Bora....his daddy passed away some monthes ago...but i am having concerns about his own health.
I have invited him to come to us...but i do not know if he is strong enougth to do that.
Bora used to "surf" the internet....once he found Brazilians talking inside one of our foruns...talking about him....he came to me asking me translations....so...he use to track everything that is connected to his name and amplifiers.
I have strong concerns.... i hope someone can inform something about Bora.....VICTOR!!!!...please, do you know something?
regards,
Carlos
Re: I have sent a mail to Bora, asking his presence
Bora it's now OK as I know.Why?
destroyer X said:
But i am "feeling"...sniffing...that Bora is sick.
Can someone inform what is going on with Bora....his daddy passed away some monthes ago...but i am having concerns about his own health.
I have invited him to come to us...but i do not know if he is strong enougth to do that.
Bora used to "surf" the internet....once he found Brazilians talking inside one of our foruns...talking about him....he came to me asking me translations....so...he use to track everything that is connected to his name and amplifiers.
I have strong concerns.... i hope someone can inform something about Bora.....VICTOR!!!!...please, do you know something?
regards,
Carlos
Bora it's now OK as I know.Why?
Reason why?...it is because i am inviting him to come to us.
because his designs are appearing here, in this International forum...as there are people that wants his presence...as he may be happy to know what is happening here... and we will be honored by his presence.
Also i am a personal friend of him..we used in the early past to communicate with reasonable constance...so...i am worried...i have concerns related what happened with Bora.
I have perceived that those things interest him...as i told....happened that he answered me translations of Brazilian forum text.
This means, to me, that he is hardly interested to know everything that is connected to his name or designs,
Also because we need some advises, or, at least i need those.
And more, beeing the designer, he is the responsable related the amplifier, will be usefull to him, to know the bugs that have appeared, also to know some "special" uses, alike the one Sakis Petropoulos force the unit to work...... as Sakis needs an amplifier that will be overdriven by the mixer operator during parties..also that will work full power all time long...well..those things.
I hope i could answer your question (Why?)
regards Victor.
Carlos
because his designs are appearing here, in this International forum...as there are people that wants his presence...as he may be happy to know what is happening here... and we will be honored by his presence.
Also i am a personal friend of him..we used in the early past to communicate with reasonable constance...so...i am worried...i have concerns related what happened with Bora.
I have perceived that those things interest him...as i told....happened that he answered me translations of Brazilian forum text.
This means, to me, that he is hardly interested to know everything that is connected to his name or designs,
Also because we need some advises, or, at least i need those.
And more, beeing the designer, he is the responsable related the amplifier, will be usefull to him, to know the bugs that have appeared, also to know some "special" uses, alike the one Sakis Petropoulos force the unit to work...... as Sakis needs an amplifier that will be overdriven by the mixer operator during parties..also that will work full power all time long...well..those things.
I hope i could answer your question (Why?)
regards Victor.
Carlos
- Status
- Not open for further replies.
- Home
- Amplifiers
- Solid State
- sigma amp from dr. borivoje jagodic