Hi all,
Currently I'm listening to my DIY SE and I am very happy with it. In this amp I'm building an active filter for my new loudspeakersystem, so it's time to strip and rebuild the amp (not as much work as it seems).
In the driver circuit C22 is in the signal path. I was wondering if there are any cons to remove it completely. The interstage's load should be high enough for C22 to be removed, or am I overlooking something?
Ralph
Currently I'm listening to my DIY SE and I am very happy with it. In this amp I'm building an active filter for my new loudspeakersystem, so it's time to strip and rebuild the amp (not as much work as it seems).
In the driver circuit C22 is in the signal path. I was wondering if there are any cons to remove it completely. The interstage's load should be high enough for C22 to be removed, or am I overlooking something?
Ralph
Attachments
C22 is there to bypass R24 so that under AC conditions (music) the cathode of V4 appears to be connected to ground. If you remove it, you will be adding local feedback to the stage.
This might sound better or worse although the gain will be slightly reduced.
This might sound better or worse although the gain will be slightly reduced.
Ralph said:
Well, if you are sweating over a capacitor, let me assure you, any logical response on the actual functions of the capacitor are moot.
Tim
Ralph
You have overlooked a few things:
C22 could go but so would all that distortion that makes the amp sound the way it does and nobody likes SE for its neutral sound 🙂 Is R22 really 62k should it not be 6k (6k2) or is this a magic interstage 1:1 ?? Is there a capacitor somewhere down the line before R23 ? if not there should be; make its value such that the bass rolls off to suit the interstage transformer or preferably the output, my guess is the output is only good for about 40Hz so why push it lower or do you like the TID ? What are R1-R21 and C1-C21 doing ??
You have overlooked a few things:
C22 could go but so would all that distortion that makes the amp sound the way it does and nobody likes SE for its neutral sound 🙂 Is R22 really 62k should it not be 6k (6k2) or is this a magic interstage 1:1 ?? Is there a capacitor somewhere down the line before R23 ? if not there should be; make its value such that the bass rolls off to suit the interstage transformer or preferably the output, my guess is the output is only good for about 40Hz so why push it lower or do you like the TID ? What are R1-R21 and C1-C21 doing ??
- Status
- Not open for further replies.