I just received my sharp QA-1150 in the mail it powers up and a fan kicks on the power led however is red and when i hook up an rca cable i see nothing. I tried hitting menu but still seem to see no picture.
Please Help! 🙂
Please Help! 🙂
I figured out how to switch to video mode but the picture is very faint i put a 60 watt light bulb behind it. I put the contrast and brightness all the way up. But I cant seem to see very much. I dont want to order an overhead projector yet if my panel doesnt work correctly. Also does anyone know if the QA-1150 can handle macrovison or not?
Faint Picture
I wouldn't be too concerned about it, panels take a lot of light (a lot more than an incandescent bulb puts out)
I can hardly tell if my panel is working without the overhead projector, a light bulb won't do it. This is why a minimum of 4000 lumens is recommended for your overhead projector.
I wouldn't be too concerned about it, panels take a lot of light (a lot more than an incandescent bulb puts out)
I can hardly tell if my panel is working without the overhead projector, a light bulb won't do it. This is why a minimum of 4000 lumens is recommended for your overhead projector.
what about the macrovision? 🙂
And thanks for the other answer.
Also one more question How good is the 1150?
And thanks for the other answer.
Also one more question How good is the 1150?
- Status
- Not open for further replies.