Guys, hello everyone! Can you tell me how to properly configure the phase inverter, with or without a filter??? Why am I asking, because the resonant frequency of a low-frequency speaker in a closed box without a filter is 43 hertz, and with a filter of 38 hertz. What frequency should I start from in order to adjust the phase inverter? Sorry for my English.
Last edited:
Are you trying to show phase in Xsim? or are you trying to decide whether to invert the midrange?
Right click on the driver and select Invert/normal.
(A phase inverter is also part of an amplifier...?)
(A phase inverter is also part of an amplifier...?)
I think he may be talking about port tuning, i often heard audio guys from eastern europe refer to the port as "phase inverter".
No, I don't need programs!!! I've measured everything a long time ago. I am interested in HOW the port is configured. The filter must be connected, or the port is configured without a filter. Or does the filter not hurt?
It is the response with the filter that counts. The filter might change the speaker Q. This means the alignment may change.