Service Manual for Vincent SV-233 Ampilifier

Hello people,

I am looking for a service manual for a Vincent SV-233 amplifier (the one with the 3 inputs) and have already searched the whole internet.

But it seems that there is no such thing for Vincent Audio devices.

Or do any of you have information about a service manual for a Vincent SV-233 ?

I would be happy if there was something.

Greetings

Dirk
 
I have the schematics !
Oh das ist eine wirklich gute nachricht.

Kann ich die irgendwie bekommen ?
Als PDF oder hochauflösende Bilder ?

Ich hatte schon beim Hersteller nachgefragt, aber die geben die Service Manuals nicht an privatpersonen raus.

Erreichen kannst du mich per Mail : firefly-10[at]web.de

Würde mich freuen wenn ich die Schematics erhalten könnte.

Grüße

Dirk
 
Sorry first text was german. 🙁

Oh that's really good news.

Can I get it somehow ?
As PDF or high resolution images ?

I had already asked the manufacturer, but they don't give out the service manuals to private persons.

You can reach me by mail : firefly-10[at]web.de

I would be glad if I could get the schematics.

Greetings

Dirk
 
Dear all,
Is it possible to get the schematic of Vincent sv-233 from you? I am owner of the amplifier and cd-s3 since 2003 and there is a moment to make a service. I wrote to sheng-ya company that is manufacturer but without success. So I was forced by circumstances to service cd without documentation.. It will be better to have schematic before servicing amp. I would be grateful.
Greetings
Pablo
 
hello Pablo,

I have received the schematics from greierasul and in the meantime also from the German company that has the trademark rights to the name Vincent. Since I don't know if you can publish something like that here, because of copyright, I'll send it to you as an email. Contact me at : firefly-10[at]web.de

I will send it to you then.

But you could also do me a favor ?
Since my amplifier must have fallen on the front panel at the previous owner, the inner of the two knobs is probably a little dented, so that they drag on the front panel. Since I do not know how the rear of the knobs really looks, I could use a simple photo of how far the inner protrudes.

See picture of what it looks like on mine. I think the inside has been pushed in.

could you maybe pull off the input knob (they are just plugged in) and take a picture of the back part inside like in my picture ?

Would be grateful to you.

Greetings

Dirk
 

Attachments

  • Drehknopf-2.jpg
    Drehknopf-2.jpg
    136.8 KB · Views: 124
Hi Dirk,
I will be happy to get the schema. Email is p.gablo(at)gmail(dot)com.
Regarding to your problem with knob I checked how my looks and it seems it is the same. The black inside plastic is 2 mm deep in relation to the edge of the silver part. You can see that on attached photo. So may be you have problem with the axis of the switch...
Greetings
Pablo
 

Attachments

  • IMG_20221214_164037.jpg
    IMG_20221214_164037.jpg
    329.7 KB · Views: 96
I have the schematics !
Salutare! Dacă ai putea sa-mi trimiți și mie manualul PDF cu diagramele pentru Vincent SV233, aș fi recunoscător! octavian.ovac(at)Gmail.com

:cop:You must post in English on this forum. Translation below:
Howdy! If you could also send me the PDF manual with diagrams for the Vincent SV233, I would appreciate it! octavian.ovac(at)Gmail.com