Hey everybody I was wondering if you all would be able to help me with my search. I am looking to build a transmission line speaker. I have been searching the internet for a kit or plans for a nice TL design. The only one that I have found was one in the Zalytron catalog. However, the focal drivers appear to be no longer made as the project is a few years old. Has anyone come across any TL designs on the internet or elsewhere(exclude the one in Mr. Weem's speaker book). Or does anyone have an ideas on one they're building, or have built that they would like to share.
A good website to start with is (lots of links and projects)
http://www.t-linespeakers.org
Also another good site that from memory has at least on TL design,
http://www.speakerbuilder.net
The only TL kits I know of are one from Seas called the Thor
http://www.seas.no/thor.htm
and VAF Research have TL based kits,
http://www.vaf.com.au
I have built a pair of 2 way floor standing TL speakers that I am very happy with. I have not gotten around to setting up a web site yet, but I am happy to send you some pictures if you are interested.
Regards,
Tim.
http://www.t-linespeakers.org
Also another good site that from memory has at least on TL design,
http://www.speakerbuilder.net
The only TL kits I know of are one from Seas called the Thor
http://www.seas.no/thor.htm
and VAF Research have TL based kits,
http://www.vaf.com.au
I have built a pair of 2 way floor standing TL speakers that I am very happy with. I have not gotten around to setting up a web site yet, but I am happy to send you some pictures if you are interested.
Regards,
Tim.
Tim if you have the time id love to see the pics of your speakers. By the way what drivers did you use in it?
I will send you the picks when I get home (3-4 hours).
They ar about 1MB worth. I only have a very rough hand drawn plan, but I will scan it in and sent it also.
The drivers are both Vifa,
D27TG-35-06 1" Silk Dome Tweeter
P17WJ-00-08 6.5"Polycone Midbase
Regards,
Tim.
They ar about 1MB worth. I only have a very rough hand drawn plan, but I will scan it in and sent it also.
The drivers are both Vifa,
D27TG-35-06 1" Silk Dome Tweeter
P17WJ-00-08 6.5"Polycone Midbase
Regards,
Tim.
You might want to check this website out.
http://www.zelfbouwluidsprekers.nl/
It has a Scanspeak TL called EVENT using
1) Mid woofer 18W8535
2) Tweeter D2905/9300
I think this kit should be very good value for money as the drivers are well known for their musicality.
BTW I'm looking for some testimonials from anyone in this forum who has built this kit. Pls share your experience with us. Thanks.
will.
http://www.zelfbouwluidsprekers.nl/
It has a Scanspeak TL called EVENT using
1) Mid woofer 18W8535
2) Tweeter D2905/9300
I think this kit should be very good value for money as the drivers are well known for their musicality.
BTW I'm looking for some testimonials from anyone in this forum who has built this kit. Pls share your experience with us. Thanks.
will.
Tim,
That is my site :^)
If you'd like, i'd be happy to put your project up on my TL site. You can get my email from the bottom of the URL above.
dave
timc said:A good website to start with is (lots of links and projects)
http://www.t-linespeakers.org
I have built a pair of 2 way floor standing TL speakers that I am very happy with. I have not gotten around to setting up a web site yet, but I am happy to send you some pictures if you are interested.
That is my site :^)
If you'd like, i'd be happy to put your project up on my TL site. You can get my email from the bottom of the URL above.
dave
Hi Dave,
Thank you for your great site! It was a great resource to me when I was building my speakers.
I had always intended to offer my project back to your site, but currently my speakers are finished only in raw MDF. I was going to wait till after I have veneered them before posting them on the web.
Regards,
Tim.
Thank you for your great site! It was a great resource to me when I was building my speakers.
I had always intended to offer my project back to your site, but currently my speakers are finished only in raw MDF. I was going to wait till after I have veneered them before posting them on the web.
Regards,
Tim.
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Multi-Way
- Searching for a good TL project