Hello,
the controller is included, looks like this:
you'll have to solder some pots to adjust the speed
My website is only in German when talking about this motor but you are welcome to ask your questions.
I would ask for some Euros (lets say €22), Paypal is welcome, shipping within EU no problem at all.
The Motor is stable at a range of speed but not at any speed. if you drive a 300mm platter with the original pulley using a polyamide string there should be no problem.
Cheers
Christian.
the controller is included, looks like this:
An externally hosted image should be here but it was not working when we last tested it.
you'll have to solder some pots to adjust the speed
An externally hosted image should be here but it was not working when we last tested it.
My website is only in German when talking about this motor but you are welcome to ask your questions.
I would ask for some Euros (lets say €22), Paypal is welcome, shipping within EU no problem at all.
The Motor is stable at a range of speed but not at any speed. if you drive a 300mm platter with the original pulley using a polyamide string there should be no problem.
Cheers
Christian.
You've got mail. I just want to play around with my BIX..and see how the PLL motor compares. That is one thing that is very nice about the BIX..the motor pod is seperate and allows ofcourse for different motors etc.
Regards,
Bas
Regards,
Bas
- Status
- Not open for further replies.