I am in need of schematic or any other service info please for ML-3 serial number 0223. It does not have dampening switch and only single fuse. I recall 36000 sprague capacitors. Any help greatly appreciated.
Also can anyone refer any good service Techs in my area?
Tim Naples FL
Also can anyone refer any good service Techs in my area?
Tim Naples FL
So I purchased a ML-3 from someone and he boxed it super well but had a rough ride to FLorida. It must have been left inverted upside down and dropped as both banks of filter caps came loose from there clamps byt the toroids on bottom pan. Left side actually broke both the small yellow caps on the main filter cap board. Plus they had all come loose and I was worried the boards would short so I loosened everything and corrected what I saw to be physical damage. I fired it up and it appears nothing is happeneing on the left side. I have not started poking around yet as I would feel more comfortable with a proper schematic so I can see whats going on with saftey circuit and initial boot. Or if someone other than myself needs to repair it always nice to have a schematic. I have looked real close for other damage and dont see anything else. Thanks!