I have to guess the circuit is similar to the Pilot SA-232 amp minus the 12AU7 input stage. Use the 232 as a reference to see if it's close enough.
Here's schematic of the Pilot SA-232.
Here's schematic of the Pilot SA-232.
An externally hosted image should be here but it was not working when we last tested it.
Pilot favored paraphase splitters. Maybe that clue can help you trace things out for yourself.
What sort of features, like tone controls or a phono section, does the unit have?
None
I got this as pure amp chassis only.
I have to guess the circuit is similar to the Pilot SA-232 amp minus the 12AU7 input stage. Use the 232 as a reference to see if it's close enough.
Here's schematic of the Pilot SA-232.
T
Thanks directdriver!!
This at least will give me a starting point as most Mfg. used a lot of similer circuits when using the same tubes.
Add GhostScript to IrfanView and converting PDFs to a "normal" graphics file type is easy.
- Home
- Amplifiers
- Tubes / Valves
- Schematic help for a Pilot 505 amp please