marshall avt20x schematic
What's up Doc? Sorry I couldn't resist! I like many of the folks on the site am in dire need of the Marshall AVT20 or 20XL schematic diagram. My email adress is larryxyz@msn.com I would be greatful if you would send me an email with the schematic attached.
Happy Holidays!
What's up Doc? Sorry I couldn't resist! I like many of the folks on the site am in dire need of the Marshall AVT20 or 20XL schematic diagram. My email adress is larryxyz@msn.com I would be greatful if you would send me an email with the schematic attached.
Happy Holidays!
Is there anyway to prevent r31 and c71 vulnerability from feedback? would a diode help to shunt the feedback voltage?
Sorry?, I'm completely baffled as to what you asking?.
R31 is the feedback resistor for the power amp and C71 (along with R53) is a Zobel network.
Need AVT-20 schematic-Marshall Valvestate 2000-----Also Guild Thunderbass head-joetee9@optimum.net Thanks
Ciao sono Mimmo sono un nuovo iscritto al forum come potete capire sono italiano cercavo lo schema dell' amplificatore per chitarra marshall avt20x se potete aiutarmi ve ne sono grato
English is the official language of the forum, and at minimum all non-English language posts MUST include an English translation. I will translate this and the next post. Next time please post in English.
Translation: "Hello, I'm Mimmo, a new member of the forum to learn/understand. I'm Italian looking for the schematic for Marshall ACT20X. If you can help me I will appreciate it."
Ciao a tutti sono un nuovo del forum chiedevo se potevate inviarmi lo schema del marshall avt20x grazie
Hi Everyone, I'm new to the new to the forum hoping someone can send me a schematic for the Marshll AVT20X. Thanks.
alot of people are having a problem with avt20's
with r53 burning out and excess noise, and this is not the only forum
audio-talk :: View topic - Flamin' Marshall AVT 20!
has other information on this problem that may be usefull,
or if any one can help me on this
i replaced:
the ic chip - lm1875t
c71 - .22uF 63 volt cap
R53 - 10R (1/2 watt) resistor
and fixed all dry solder
the problems i still have are:
R53 just burn's out when turned on, however it doesn't burn out when the amp is running an external speaker cab?
and there is high frequency whistling and noise whether the amp is running its own speaker or a cab..... also there is excess noise but not the same whistling when the amp is amplifying the c.d. input.
with r53 burning out and excess noise, and this is not the only forum
audio-talk :: View topic - Flamin' Marshall AVT 20!
has other information on this problem that may be usefull,
or if any one can help me on this
i replaced:
the ic chip - lm1875t
c71 - .22uF 63 volt cap
R53 - 10R (1/2 watt) resistor
and fixed all dry solder
the problems i still have are:
R53 just burn's out when turned on, however it doesn't burn out when the amp is running an external speaker cab?
and there is high frequency whistling and noise whether the amp is running its own speaker or a cab..... also there is excess noise but not the same whistling when the amp is amplifying the c.d. input.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Live Sound
- Instruments and Amps
- Schematic for Marshall AVT20 Needed