byo? schematic?
crate parts vanishes 2018
is it simple to build?
zeners? anti-reverse diodes? led colors? 2each 1/4" female jacks? why 2 cables between amp & footswitch?
is 3button fs clone cheaply avail?
crate parts vanishes 2018
is it simple to build?
zeners? anti-reverse diodes? led colors? 2each 1/4" female jacks? why 2 cables between amp & footswitch?
is 3button fs clone cheaply avail?
3 button fs crate flexwave65/112
There is already 10vdc emf provided by the amp thru the dual jacks of the rear panel to plug stereo 3 conductor feed unto fs
There is already 10vdc emf provided by the amp thru the dual jacks of the rear panel to plug stereo 3 conductor feed unto fs
The only thing I’m not certain about is the amp manual shows two stereo cables for the foot switch while the Apex has one stereo and one mono. It seems to be fully functional but I haven’t popped the lid on the amp to see if the DSP jack is mono or stereo. I’m tempted to plug a stereo cable in and see how the amp behaves when I short the tip to the ring and to the sleeve.
remember folks, without the proprietary footswitch, you will be relinquishing one whole bank called bank "B" of preset memorizations, so, for a total of memorization count of three channel times two banks, that equals six memorizations! that's faster switching than staring down at the floor pedal array