I've been building a duplicate of the Geer eVeII cabinet for the bass driver which will be a closed box.
One thing I am not sure it that should I use the 01 or 00 version. In his website, he uses the 01 version which is supposedly for the ported enclosure.
The cabinet I am building is a closed one with about 56 litter but taken into account braces and other things it will be around 50 litters.
Should I go for the 01 or 00 version? I prefer tight bass over extension.
One thing I am not sure it that should I use the 01 or 00 version. In his website, he uses the 01 version which is supposedly for the ported enclosure.
The cabinet I am building is a closed one with about 56 litter but taken into account braces and other things it will be around 50 litters.
Should I go for the 01 or 00 version? I prefer tight bass over extension.
I use two 01's in seperate 50LTR enclosures
http://www.diyaudio.com/forums/showthread.php?s=&postid=664677#post664677
http://www.diyaudio.com/forums/showthread.php?s=&postid=664677#post664677
Mine eVe II
Hi, i made the eVe's by my self. I made it with the 00 version. Did you already made the eVe's ??
here is a link of the building process. It's a bit old becouse i modificate the eVe a little bit with the High-end tweeter from Scan Speak ( 2904-70000 )
see here for some building process of scan speak:
My home page
And this is the eVe II now:
Hi, i made the eVe's by my self. I made it with the 00 version. Did you already made the eVe's ??
here is a link of the building process. It's a bit old becouse i modificate the eVe a little bit with the High-end tweeter from Scan Speak ( 2904-70000 )
see here for some building process of scan speak:
My home page
And this is the eVe II now:
An externally hosted image should be here but it was not working when we last tested it.
hi, my current project uses a 8555-01 in a 35 liter sealed enclosure, might be better in a slightly larger box but cant make the speaker any larger or it wont fit in my room! A Q of 0.7 is meant to be 21 liters so should be ok, certianly i built a 21 liter enclosure and there was a very slight difference in sound but was very, very subtle, with the larger box being slightly tighter.
The 01 works fine in a sealed box, sounds nice and tight and goes suprizingly deep- although it models as only going down to -3dB at 55 Hz, theres good output right down to the mid 30's so deepness shouldnt be a problem either 🙂
The 01 works fine in a sealed box, sounds nice and tight and goes suprizingly deep- although it models as only going down to -3dB at 55 Hz, theres good output right down to the mid 30's so deepness shouldnt be a problem either 🙂
Re: Mine eVe II
Well, I actually almost done with the cabinet but after not able to get any response from the designer of the speaker, I decided to build Troels AcapellaSe instead. I very much enjoy the AcapellaSe and I thought the Seas Excel drivers sound terrific.
How do you like your eVe II?
fireman1 said:Hi, i made the eVe's by my self. I made it with the 00 version. Did you already made the eVe's ??
here is a link of the building process. It's a bit old becouse i modificate the eVe a little bit with the High-end tweeter from Scan Speak ( 2904-70000 )
see here for some building process of scan speak:
My home page
And this is the eVe II now:
An externally hosted image should be here but it was not working when we last tested it.
Well, I actually almost done with the cabinet but after not able to get any response from the designer of the speaker, I decided to build Troels AcapellaSe instead. I very much enjoy the AcapellaSe and I thought the Seas Excel drivers sound terrific.
How do you like your eVe II?
wow this is an old thread, didnt look at the dates on the posts!
hehe im glad to hear that you like your acapellas 🙂
hehe im glad to hear that you like your acapellas 🙂
Re: Re: Mine eVe II
The AcapellaSe is not familier to me. Do you have a PIC or link?
The eVe II is realy great. In al nuances. high/mid/lower. It is very musical and it match with my naim setup.
This speaker is very strong and powerfull when you pump up the volume.
Apitty that Edgar didn't react. When i mail him it took also a view days or weeks before he give a reaction.
andy2 said:
Well, I actually almost done with the cabinet but after not able to get any response from the designer of the speaker, I decided to build Troels AcapellaSe instead. I very much enjoy the AcapellaSe and I thought the Seas Excel drivers sound terrific.
How do you like your eVe II?
The AcapellaSe is not familier to me. Do you have a PIC or link?
The eVe II is realy great. In al nuances. high/mid/lower. It is very musical and it match with my naim setup.
This speaker is very strong and powerfull when you pump up the volume.
Apitty that Edgar didn't react. When i mail him it took also a view days or weeks before he give a reaction.
The Acapella is one of very many designs by Troels Gravesen.
His site is highly recommended.
www.troelsgravesen.dk/DIY_Loudspeaker_Projects.htm
His site is highly recommended.
www.troelsgravesen.dk/DIY_Loudspeaker_Projects.htm
Mingo said:The Acapella is one of very many designs by Troels Gravesen.
His site is highly recommended.
www.troelsgravesen.dk/DIY_Loudspeaker_Projects.htm
That's a nice speaker aswell. But my "love" is scan speak 🙂
On the site are very lovely speakers built.
My next project is http://www.troelsgravesen.dk/W1500_97.htm maybe as rear in a HT setup. Must sound very great.
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Multi-Way
- Scan speak 21W/8555-00 or 21W/8555-01