Does any body know a nice DIY speaker wich consist of a scan speak 15W8530K00.
I have a pair of these here at home ( new ) and i like to build a nice speaker.
Options for now:
- http://www.troelsgravesen.dk/Ellam.htm
- http://www.troelsgravesen.dk/W1501_95.htm
- http://www.troelsgravesen.dk/W1500_97.htm
the last one will be my favorite becouse i know the tweeter from my previous speaker/speaker that i have now -> eVe II
I built it first with the 9700 tweeter, later with the 7000 tweeter 🙂
So who has more (proto) type of speakers with a pair of 15W8530K00
URL + PICS are welcome
I have a pair of these here at home ( new ) and i like to build a nice speaker.
Options for now:
- http://www.troelsgravesen.dk/Ellam.htm
- http://www.troelsgravesen.dk/W1501_95.htm
- http://www.troelsgravesen.dk/W1500_97.htm
the last one will be my favorite becouse i know the tweeter from my previous speaker/speaker that i have now -> eVe II
I built it first with the 9700 tweeter, later with the 7000 tweeter 🙂
So who has more (proto) type of speakers with a pair of 15W8530K00
URL + PICS are welcome
Try to search the internet for the A4 monitor (Dutch).
By the way, there is a comparison between the A4 and a similar speaker on Troels´homepage. Look at the latest file from Macedonia (was it dated April 30?)
By the way, there is a comparison between the A4 and a similar speaker on Troels´homepage. Look at the latest file from Macedonia (was it dated April 30?)
I've paired my ScanSpeak 15W/8530K01 drivers with Heil AMT tweeters. The box is 35x34x20cm, with a volume of 15 litres. Just love the sound - very natural, balanced, accurate... I'm driving the speakers with a DIY tubeamp.
You may check the speakers out at my website:http://www.moxtone.com/moloh.htm
Regards,
Milan
P.S. The tubeamp project is underway under the Siemox F2a heading.
You may check the speakers out at my website:http://www.moxtone.com/moloh.htm
Regards,
Milan
P.S. The tubeamp project is underway under the Siemox F2a heading.
Hi:
The box is made of 19 mm thick MDF boards, which are glued together at the edges using wood glue. The box was first treated with some car-repair putty, then sanded with sandpaper and sprayed over with a black acrylic car finish. When the paint was dry, I applied a single coat of clear laquer for protection. The front is angled at 10 degrees.
I bought the tweeters off of eBay for around 150 USD/pair. The front grill shown in the picture cannot be removed although I believe there are some models of these particular tweeters where the (silver plastic) grill comes off (10B model or similar).
I hope this helps.
Regards,
Milan
The box is made of 19 mm thick MDF boards, which are glued together at the edges using wood glue. The box was first treated with some car-repair putty, then sanded with sandpaper and sprayed over with a black acrylic car finish. When the paint was dry, I applied a single coat of clear laquer for protection. The front is angled at 10 degrees.
I bought the tweeters off of eBay for around 150 USD/pair. The front grill shown in the picture cannot be removed although I believe there are some models of these particular tweeters where the (silver plastic) grill comes off (10B model or similar).
I hope this helps.
Regards,
Milan
- Status
- Not open for further replies.