I desided to change the tube sockets and use the 6v6 tubes for another project. Wired in the missing 10M resistors. gonna fire it up later today to take some measures and see if everything are ok when it comes to voltages.
Update . Its alive 😀 it still had some gremlings with the rca and potmeter connections. But im gonna change it now and try to fire it up again to see if the problem still exists.
1Finally. After checking. Measuring and so on. It plays on both channels. And it plays really good too! Thanks alot guys for all the help . It need some small tweaks before it will run optimally but it works!
First i fixed the rca connections and changed the potmeter. Turned it on and it still played only on the left speaker Hmm. Switched places on the ef86 tubes. No difference.
Switched places on the el84 tubes. It started to play on the right speaker instead. Aha!! A dead tube!! Swapped out the dead tube and voila! It worked on both channels .
First i fixed the rca connections and changed the potmeter. Turned it on and it still played only on the left speaker Hmm. Switched places on the ef86 tubes. No difference.
Switched places on the el84 tubes. It started to play on the right speaker instead. Aha!! A dead tube!! Swapped out the dead tube and voila! It worked on both channels .
Last edited: