Hi,
I’m looking for the take up spindles (pulley, the parts that fit into the cassette holes) for a Sansui SC-5330 cassette deck.
This deck was an open front-loading unit without a door. The sprockets were spring loaded so you could push a cassette onto them. They consist of the normal sprocket that slipped onto a plastic hex part with a spring and was secured with a cap screw.
All that is left are the hex shaped spindles from the motor, so I need the spring, sprocket, and cap screw or the specks to make my own.
Any help would be greatly appreciated.
I’m looking for the take up spindles (pulley, the parts that fit into the cassette holes) for a Sansui SC-5330 cassette deck.
This deck was an open front-loading unit without a door. The sprockets were spring loaded so you could push a cassette onto them. They consist of the normal sprocket that slipped onto a plastic hex part with a spring and was secured with a cap screw.
All that is left are the hex shaped spindles from the motor, so I need the spring, sprocket, and cap screw or the specks to make my own.
Any help would be greatly appreciated.