I am in the process of modifing my dddac. I will add a buffer and some bether powersupplys. it will also get transformer output. The only thing I miss Is the opurtunity to conect a cd transport to it. I see tentlabs have a spdif in I2s out board. then I would only need to get a board with multiple i2s in and 1 out. Audiophonics has one board like this.
The only problem is tentlabs is out off stock. Do anybody now off some other boards with spdif in?
The only problem is tentlabs is out off stock. Do anybody now off some other boards with spdif in?
Last edited by a moderator:
You could make a SPDIF->I2S board with a WM8804 or WM8805. The example in the data sheet should get you pretty far.
Tom
Tom
I would need a finished board. I now basic soldering but smd ore pcb layout is way above my knowledge
https://www.audiophonics.fr/en/inte...xial-toslink-to-i2s-wm8804-board-p-10098.html
could I use this board?
could I use this board?
An WM8804 (spdif to 2is converter) and a 12 MHz Tent clock are (usually) present on the dddac mainboard (you might want to check on yours and confirm), so you might be closer than you know to a spdif input. There is provision to add a switch too, add an rca plug on the chassis and away you go.
I may be misunderstanding your question, but the DDDAC board accepts SP/DIF input already.
