Already addressed the "usual suspect i.e. the 100uf caps on the feedback side of the input long tailed pairs.
That snot it. One channel is about 5v positive, other a couple of volts negative. This is of course triggering
the DC protect to prevent speaker flames. Suspicion is on the input pairs (2 x A1016 and 2 x C2362 per channel )
PITA to get a pile of these things to gain match them.
Any other "usual suspects" I have missed?.
M
That snot it. One channel is about 5v positive, other a couple of volts negative. This is of course triggering
the DC protect to prevent speaker flames. Suspicion is on the input pairs (2 x A1016 and 2 x C2362 per channel )
PITA to get a pile of these things to gain match them.
Any other "usual suspects" I have missed?.
M