All the switches and pots operate as they should. The brake clean worked excellent on the board. I like it better than water because it evaporates so fast. The amp has been playing hard for about 15 min now NO issues.
Thanks so much !!!!
Thanks so much !!!!
Just an update, also found a faulty RCA input jack with a wiggle test. All issues are resolved and amp is still running hard......Awesome !!!!!!
Hi everyone i have a rf t800.2 with board pc 4698A i need information on a couple of resistors or transistors i should say which are on Q4 and Q5 place i dont know the value of either one as they where pretty badly burnt. Any help would be greatly appreciated
Hey there perry i need help on this same amp im working on a t800.2 i need the values for transistors on Q4 and Q5maybe a part number would greatly appreciate any info you can give me
In the future, if you need help, start a new thread.
RM/10 means that it's a 1/10 watt resistor. It will be 0805 size. These are all 10 ohms.
There are no part numbers for resistors. You have to find suitable replacements from wherever you order parts (not ebay, use mouser or digi-key).
RM/10 means that it's a 1/10 watt resistor. It will be 0805 size. These are all 10 ohms.
There are no part numbers for resistors. You have to find suitable replacements from wherever you order parts (not ebay, use mouser or digi-key).
- Status
- Not open for further replies.