Hello! So I got this t3002 from my brother and the speaker outputs are putting out a steady stream of power all the time. You can hear some music... Then smell blown voice coils... Rip w7... Well anyway after searching all night I have found nothing at all about this problem + amp combination.
When I run it at a lower amperage the speakers produce more music and if I wire it up in my car it just pushes my p2's into their baskets with no sound what so ever. So I was thinking one or more of the resistors are fried. I have been looking for a schematic for this unit to only find wiring diagrams to hook it up.
I found this post
But the thread wasn't about that so I'm still hunting down info
I have a ton of experience soldering amps but not locating bad components... Mostly I just have to resolder broken off smds or fried transistors but I have looked at every inch of this thing and I cannot find anything physically wrong
Any help for this tired fool would be Just awesome.
When I run it at a lower amperage the speakers produce more music and if I wire it up in my car it just pushes my p2's into their baskets with no sound what so ever. So I was thinking one or more of the resistors are fried. I have been looking for a schematic for this unit to only find wiring diagrams to hook it up.
I found this post
^ that's exactly my problem.Perry, I have seen several of these amps with negative rail on the speaker output and come on and remain on untill the smoke comes out of the speaker.
But the thread wasn't about that so I'm still hunting down info
I have a ton of experience soldering amps but not locating bad components... Mostly I just have to resolder broken off smds or fried transistors but I have looked at every inch of this thing and I cannot find anything physically wrong
Any help for this tired fool would be Just awesome.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.