I replaced the outputs in 2 of the channels. Also replaced the following transistors
Q105
Q106
Q112
Q113
Q114
Q115
Q116
Q117
I also checked all the 10 ohm gate resistors on the outputs i replaced.
Amp still draws excessive current But when i remove the outputs out of the 2 channels that were bad the amp powers up perfectly..
Any ideas?
Q105
Q106
Q112
Q113
Q114
Q115
Q116
Q117
I also checked all the 10 ohm gate resistors on the outputs i replaced.
Amp still draws excessive current But when i remove the outputs out of the 2 channels that were bad the amp powers up perfectly..
Any ideas?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Rockford fosgate 550x