• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Rickard Berglund 845 driver (Sound Practices 94/95)

Status
Not open for further replies.
845 is a directly heated triode. No screen grid.

Perhaps you could post a schematic?

Here it is ...
20170620_180631c_zpseleirpxj.jpg


http://i98.photobucket.com/albums/l...screen driven driver-d2.0 cct_zpsat3aqioe.jpg

http://i98.photobucket.com/albums/l...screen driven driver-d2.0 psu_zpsnzuvftks.jpg
 
I used the 5881 screen driven; i had tried many circuits but could never get good dynamics; the amp was transformed had very good dynamics. The 845 in my amp had 750 volts so made it very easy to use the screen driven 5881. Most 845 commercial amps i have heard sound very dull and lifeless. My speakers are over 100db so do not need any more power the screen driven 5881 works very well with 813's too
Phil
 
Status
Not open for further replies.